skip to main content

Looking for a similar floor, please can you tell me what it is?

9 years ago

Marylebone Flat · More Info

Sort by:Oldest

Comments (2)

PRO
Brian O'Tuama Architects
9 years ago
It's European oak, 140mm wide boards, smoked and oiled white.
Helen Prideaux thanked Brian O'Tuama Architects
cjbrady4567
7 years ago
Hello I love the wall colour please could you tell me what paint you used? Thank you
Related Discussions
Upstairs Floor plan - please can you help?!!
Q
Comments (11)
Hi Silvia, Thank you for your suggestion, it's much appreciated. Unfortunately the cupboards which are currently in bedroom one would be too small to convert and if we did convert them then we would need to find some other space for clothes. I think we will need to build an ensuite next to the current bathroom for soil pipe reasons too. It's a bit of an awkward space so we are thinking of knocking internal walls down upstairs and changing the layout completely. Please let me know if you can think of a better layout! Stephanie
...See More
Cork, marmoleum, bamboo, tell me what you would suggest for 3 bedrooms
Q
Comments (3)
Do you know what wood the parquet is made from? If I was you I would move my sofa and sand back a bit of the floor that will be covered by furniture. Then I would be able to see the kind of colour I'm trying to work with. I would say if both floors are going to be a mid to light colour it would be best to get as close a match as possible colour wise. I have two slightly different oak floors at home and it does look a little weird where they join (but then they are different plank sizes too). It just depends how particular you are. Did you know you can get bamboo parquet? If you are not too precious about the old parquet floor I would suggest that after sanding back you stain it in a colour to match with your new bamboo floor, then even if the two floors are a different design the difference won't be glaringly obvious.
...See More
Can anyone tell me where I can get a 1000x900 shower enclosure please
Q
Comments (12)
Hi Sunny, I'm guessing the layout is like this then? Which is why you wanted a 900mm wide shower. I'd actually go with the 900 x 1200 as it's longer and will suit the room better, plus, if the layout is like this, then you have the room for it. Here's a link to all those in that size from Victorian Plumbing, so depends what your style is. Victorian Plumbing. They sell loads, so i'm sure you'll be able to find one that will suit. One thing to watch out for is the size of the basin and toilet. You will be better off with a short projection toilet and don't come out too far with the basin either as the space to exit out of the bath will be lessened. Regards to flooring, tiles etc, that's personal choice. What style do you like, what colours do you like, and most importantly what is your budget for the project?
...See More
Kitchen Doors - tell me more please
Q
Comments (4)
Depends on the door style you like, ie do you like a more traditional or shaker style, a modern gloss kitchen, handleless kitchens, flat slab doors with handles, very modern true handleless, and also the accessories you want, are they available like wine racks or display cabinets. So for a shaker door, this would be a 5 piece wooden door, usually made from ash (popular with painted doors) or oak and a veneered centre panel and the frame is a tenon joint, cheaper doors have a v groove running through the joint instead of smooth, doors are about 20mm thick, usually standard sizes but some bespoke suppliers. Considered best. But there's also 5 piece mdf doors that have a vinyl wrap which usually has a woodgrain and can be coloured, also about 20mm, can be made to measure sizes, Then you also have a vinyl wrap mdf door thats a 1 piece door that's been machined on the front and then covered in a coloured vinyl, if the vinyl has a grain it runs only one way and these are only 18mm. Can be made to measure sizes. These can be flat slab, shaker style or other options and are your cheapest. For a gloss kitchen then a painted and lacquered door is best, a flat slab door is usually 18mm mdf but a few 22mm are available. For a handleless J profile door you need 22mm doors to allow for the handle, usually mdf and painted and lacquered for gloss or matt, the vinyl doors (apart from a few cheap cut and edged 19mm thick) just don't have a deep enough handle. Theres also acrylic faced flat slab mdf doors with a choice of edging, 18mm thick and can have a matt or gloss finish, good quality and finish. Cheaper mfc 18mm doors, these are melamine faced chipboard in a multitude of colours and woodgrains and can have a 1-2mm edging, can be made to measure and depending where its made you can get them made with a woodgrain and book leaved so the grain follows from door to door. which can look stunning. The true handless look is just having a handle rail beind the doors fitted to the cabinets and the doors are just a flat slab door as above Then you also have in-frame kitchens which are usually quite traditional with a frame around each door or drawer pack, usually a shaker style door and all made from wood and can work out pretty expensive. Can have visible butt hinges for that traditional look.
...See More

Sponsored

More Discussions

Glass room or conservatory?

42

Help with Kitchen / Diner layout

14

Inspiration needed for bathroom remodel, please! Before picture below.

6

(Side return) extension inspo

9

Floor plan layout help

5

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.