skip to main content

Hello who did you use for the glazing - love the door as well?

8 years ago

Grove Hill Road · More Info

Comment (1)

PRO
MTA Architecture & Design
8 years ago
Minimal glazing system - IQ glass - good luck!
Related Discussions
Do you use the Nest thermostat?
Q
Comments (28)
I had their rival Hive installed in February along with new boiler and radiators. Same concept. Worked fine for 2 months then continually loosing signal, I'm only in a small 2 bed terraced and the hive people say it's because the distance is too great between hub and receiver. Rubbish. And didn't solve it when I moved things closer. They're at a loss and when I google it a lot of hive users have same problem. Fantastic idea but it's not working. As it's summer I'm not too concerned but I'm going to have to start investigating and at my cost to switching to a traditional thermostat or to something like nest. I'm very wary though as it was a pain when I couldn't control it and it was suddenly reading temp 32 in my house when I was out at work!
...See More
POLL: Single, double or triple glazed?
Q
Comments (55)
chanti1, my grandparents used to have massive condensation problems with their double glazing as it was added as an afterthought, it had about a 4 inch gap and was not sealed so they would have to keep cloths in the gap to mop it all up. In my parents house there were a couple of windows prone to this problem between the panes - caused when the seal on the double glazed units failed. Because you can't get to it the result is eventually mould. The units had to be changed which to my mind seems drastic and wasteful. There should be a way of removing, cleaning and resealing units on site. Of course condensation happens with single glazing all the time. Where I live now we get condensation on the outside of the window at night. Air conditioning indoors and extreme humidity outside with night time temperatures still in the high twenties centigrade does that.
...See More
Who else has kept their 1930's original glass panels and front door?
Q
Comments (17)
We would always recommend replacing original doors with timber. It would be a shame to lose the authentic look and although UPVC composite doors are much better than they used to be they still don't look like real wood. Our wood doors have the same multi point locking system as a UPVC door for high security and the U-Value (insulation) is the same. No cold drafts with our doors. Also with our Teknos paint finish you can match it to any colour you want. Farrow & Ball french grey is very popular at the moment. We recently did this custom door with bespoke stained glass. The client wanted the glass to replicate the original stained glass but wanted new seals etc so we re-designed the glazing for them and they matched the sage green paint that they had used around their home. I hope you manage to persuade your partner to either keep the original door or replace it with wood. Good Luck!
...See More
Tell us: Do you have any home renovation regrets?
Q
Comments (32)
Whilst I recognise there's a few tradespeople on here bemoaning fussy clients I have to say my biggest regrets when renovating my house was not being specific enough with trades! We had an electrician put in an extra light switch in the hall to control both the downstairs and upstairs lighting. He put it in a good 10-15cm lower than the other switch further along the same wall which looked completely ridiculous. Made him move it in line with the other one much to his annoyance. Another similar incident was with a vertical column rad for the kitchen - whilst I was specific enough this time to ask it be centered to the wall it was on, he installed it much higher than needed with about 30cm of pipe sticking out the bottom! It would have looked much better in line with the doorframe adjacent. Had to learn to live with that one. We had engineered wood floors put in upstairs - the fitter used the shortest wall in the smallest room to take a plumbline from. When it came into the hall it was obviously on a complete wonk. By this point I'd gotten a bit better at speaking up and ensuring we actually got what was needed (and paid for!). He had to take it up and re-lay using the hall as the plumbline. Looked so much better but he was extremely annoyed! After all this I learned to use masking tape to direct exactly where pipes/light switches/trim should be fitted so there was no room for 'interpretation'. I also forced myself to speak up more and advocate for what I really wanted. That said I'm a designer by trade so I generally know what I want and how to make it look good but was definitely a bit too shy to contradict trades in the beginning!
...See More

Sign Up to Comment

Sponsored

More Discussions

what goes with red and black quarry tile flooring

10

How can I make this wall look less bare?

7

Kitchen/diner extension where to put kitchen?

2

Top garden ideas

2

What type and colour of driveway?

1

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.