Simple Works Contract

7 years ago

Have an architect designed home in Melbourne that's been to tender and I've picked a builder. Been presented with the standard 69 page Simple Works Contract created by the AIA and Master Builders Australia.

What has been your experience using this contract? Especially interested to hear of any issues had with the contract or with the build and how it was resolved with the contract.

Featured Answer

PRO

Cathi Colla Architects

7 years ago

last modified: 7 years ago

The Simple Works Contract is written in collaboration with the Master Builders Australia and the Australian Institute of Architects. The purpose of the contract is so that the risk (cost of work and timing) is equally shared between the builder and the client (owner). The contract is administered by an architect to ensure that each party is equally protected.

The contract is good because the client will know up front the cost of the works and timing of the works. If there is a need to vary time and cost then the builder has the right to claim additional time and cost. The contract clearly sets out the process of variations to the project.

An example would be if during the course of the renovation there are termites found in the floor structure the builder can make a claim for additional time and cost. Another example would be if a client (owner) wants to make a change to the kitchen joinery such a change would impact the time and cost, again the builder has a right to claim for additional work and time.

Another good reason to use this contract, from a clients point of view, is if the project runs over time there is a part of the contract which requires the builder to pay the client/owner penalties to cover additional costs due to the delay (such as rent when the client can't move back into their home).

There are other contracts that can be beneficial for different reasons. Just make sure you are protected during your project.

Hope this helps! Good luck for you project!

Sort by:Oldest

Comments (15)

Tribbletrouble44152k7 Trek
7 years ago
Bump.
LesleyH
7 years ago
Make sure the prime cost items are realistic such as allowances for tiles, kitchen, floor coverings, light fittings, sufficient power points, external taps, etc. This is where blow outs occur.
Related Discussions
Simple close board post and rail fence.
Q
Comments (2)
They are slightly cheaper in terms of materials. The arris rail (which is the rail that runs horizontally and is used to secure the vertical close board on to) come in 3 metre lengths, so you only need a post every 3 metres. Therefore over a long run you have a 20-30% reduction in post numbers. The close board comes in 1.8 metre lengths and was precut in the saw mill to 0.9metres. I screwed the close board on, but others use a labour saving nail gun. Overall the labour times is cut also. Its also easier to maintain as a damaged close board can be removed (hence the preferred use of screws) very inexpensively rather than going to the expense if a whole new fence panel. This 5.5metre run is about 6 hours work for 1 man.
...See More
Advice - work before or after move-in? + about the work
Q
Comments (7)
Thanks Minnie101 and NK With respect to the ground floor WC to bathroom - I was thinking of knocking the wall partition between utility and WC and then utilising some extra space for shower - something probably like this photo attached rather than fully enclosed shower cubicle - If could do this then I am probably thinking to leave the WC and Wash basin as it is in its place Conservatory in the future we have an idea of making it into a proper extension and that use that as entertainment room and making the current living room purely as a sitting room with fireplace - and then knocking the wall between kitchen and dinner and making it as a open plan kitchen / dinner - but thats all after we settle in and then thinking in 1-2 years time I guess
...See More
Kitchen Transformation - Sleek and Simple
Q
Comments (13)
We used Oak to tie in with the table and chairs and wall units, the insides of the cabinets were also in Oak . Oak also provides a more solid looking strip of colour working around the kitchen.On the shelf the Oak almost appears to be floating because it's surrounded by the white .
...See More
Simple (?) knock-through. Will builders be able to quote?
Q
Comments (4)
Ellie, firstly get the names of some good builders your friends have used and with whom they have been happy and that they can recommend to you. In terms of pricing, do not assume anything - and do not assume the builder will automatically price for any particular item. One would expect a good builder to ask plenty of questions to understand the full scope of the works but I would advise that the best way to avoid any unforeseen costs or misunderstandings is to provide as much detailed information as you can at the outset. Your client brief is essential in ensuring you get what you want and that all the tendering contractors have included these items - and that they are all pricing on the same basis. Time taken before you sign the contract will save you a lot of money and stress later on.
...See More
bigreader
7 years ago
I'd contact AIA and MBA and ask what is their dispute resolution process is when a complaint is made against a member resulting from this contract.

I think the standard contract is a great idea. The important thing is that you understand all of it. And as pointed out are very specific with your inclusions and specifications.

PS make sure the builder is actually a member and not just using the contract.
bigreader
7 years ago
Also the home one forum may have more specific replies for you.
PRO
VR Builders
7 years ago
As a builder I would steer clear of the simple works contact, too much power to the architects, wanting retentions, in charge of approving payments, generally slowing cash flow for the builder and then having long defects periods.
twistedstairway
Original Author
7 years ago
Thanks lesleyhawkins. No provisional sums.

Only PC items are wall tiles, floor tiles, timber deck & soffit lining.

Allowances seem generous at 60/m2, 90/m2, 120/m2, and 60/m2 respectively.
twistedstairway
Original Author
7 years ago
Thanks bigreader, sensible advice.
twistedstairway
Original Author
7 years ago
Good to hear your perspective VR Builders. There are many stories of builders going bust and we don't want that to happen to us. The builder and architect have worked together on numerous projects going back a decade and apparently have used this contract a few times, so fingers crossed for us too.
twistedstairway
Original Author
7 years ago
Great feedback Cathi Colla Architects. Primary concern for me is that we the clients are well protected under this contract - which appears to be the case. Will go study it in detail as a cure for my insomnia.
LesleyH
7 years ago
I think the timber deck is underpriced. Why is this not fully costed or is this just the cost of the decking boards? What allowance for kitchen and lighting?
PRO
alsoCAN Architects
7 years ago
In extension to Cathi's point - the main reason why the Simple Work Contract works is that some builders like to have a mediator during the building process. In this contract the architect is the mediator.

Architects don't always work with retention, but the whole point of having retention is a buffer to cover costs, like if the builder cannot finish the job and you need to find another builder. It covers some of the costs to work with another builder.

The 3 main contracts out there are:
- Master Builders Association contract - this is between the client and builder
- Housing Industry Association contract - similar the the MBA contract this is also between the client and builder)
- Master Builders Association, in collaboration with Australian Institute of Architects contract - this one is between client and builder, with architect as mediator
Hope this helps!
twistedstairway
Original Author
7 years ago
Hi lesleyhawkins, I think we're going off topic but keen to glean any pearls of wisdom on budget control. Decking is prime cost item, so the figure is for cost of materials, not install (which has been accounted for).

Not sure what you mean by kitchen and lighting. I am purchasing light fittings, the builder has to wire the house accordingly - I have a ceiling plan done for this, and will be reusing my existing light fittings. The kitchen plans have been fully drawn up and costed. The only uncertainty is around the cost of tiles which is the prime cost item. Let me know if I'm missing something.
twistedstairway
Original Author
7 years ago
Thanks alsoCAN. Good information and it does help!

Going through this process so far has taught me that good architects are worth their weight in gold. I would not be willing to spend my next 5+ years of savings on a house without seeing one.
LesleyH
7 years ago
All good twistedstairway.

Simple Works Contract

Cathi Colla Architects

Comments (15)

Tribbletrouble44152k7 Trek

LesleyH

Related Discussions

bigreader

bigreader

VR Builders

twistedstairway
Original Author

twistedstairway
Original Author

twistedstairway
Original Author

twistedstairway
Original Author

LesleyH

alsoCAN Architects

twistedstairway
Original Author

twistedstairway
Original Author

LesleyH

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Simple Works Contract

Comments (15)

Related Discussions

twistedstairwayOriginal Author

twistedstairwayOriginal Author

twistedstairwayOriginal Author

twistedstairwayOriginal Author

twistedstairwayOriginal Author

twistedstairwayOriginal Author

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

twistedstairway
Original Author

twistedstairway
Original Author

twistedstairway
Original Author

twistedstairway
Original Author

twistedstairway
Original Author

twistedstairway
Original Author