skip to main content

Need an industrial style counter to table

7 years ago

We like the industrial style table in your picture. We are hoping to get one countertop height. Any ideas where we can find one?

Industrial Farmhouse · More Info

Sort by:Oldest

Comment (1)

PRO
Designer's Brew
7 years ago
Hi There! Yes, this table is from Urban Farmhouse in OKC! They could make you anything you need!
Related Discussions
Industrial style shelves
Q
Comments (11)
Hey Marc, I think our entire project cost around £1k, but there was a lot of shelves and as you said, much bigger than what you're looking for. The shelves sit on the connectors, they aren not connected to the wall in any way. You need to ensure that you have a circular cutter that is large enough for the pole to slip through but not the connector. Ive attached a pic for you to see how the shelves sit. The angle grinder was needed to cut the poles to length, all though most suppliers will cut for a price if you provide them with a cutting list. However I would suggest having one to hand to do any last minute changes. I didn't know you could cut them with a tile cutter, but worth a shot. Issues, we live in a victorian house without a single straight wall. We also have very few joists in the walls, so we had to be creative. We used the base of the poles and created a straight line with them, and cut down the backs of the shelves so touch the wall. Much easier that way. I attached them to both the floor and the wall. We attached the base plates with Stixall glue which is stronger than anything I have ever encountered. We have a tiled floor so were unable to bolt in. And then screwed it into the wall as well. Its beyond solid!
...See More
What style dining table and chairs?
Q
Comments (9)
First of all the Kitchen fit out looks beautiful, very sleek! I would certainly go down the route of New Nordic or contemporary. I can also thoroughly recommend getting a nice sized table that will work without the need for extensions. Having an extending table throws up the question of where do you keep the extra seats, or if they are fold up, where do I get good quality fold up chairs that are comfortable for guests? I would look at getting a pair of the radius benches from Habitat to go in the back corner, or look at getting a banquette made up. Benches mean you can squeeze in an extra guest or two! a small T12 table from Hay and a few of the Hiroshima chairs by Naoto Fukasawa I think these sleek but warms designs will complement the wood already in the room, but not fuddle the sleek look of the kitchen by adding lots of extra details.
...See More
Industrial/New York loft style kitchen
Q
Comments (42)
GEC Anderson supplied the stainless steel sinks, worktops, cabinets, drawers and shelving and I don't know where the other furniture or items came from, unfortunately. Here is another view of the room in which the table and chairs may be slightly more visible. Hope that might help!
...See More
Mixing dining table and chair styles
Q
Comments (30)
The kitchen looks lovely. I like the table and it works well with the lights and I'd put the eames chairs with it or a mix of chairs (an old church chair is good for keeping kids colouring in stuff in but not sure of their age! ) What wood were you looking at? However having said that, your table is butt against the bar and the legs on this table are wider than the top so if you went for this one I think you'd need to go for a short table. As kikiamack said pedestal tables are good although hard to find a rectangular one (!) or as colourhappy said an old farmhouse one would work. Would an extending table also be an option? How many do you need to seat on a regular basis? Are the lights centred over the bench?
...See More

Sponsored

More Discussions

Pre-teen bedroom layout

19

No common toilet…deal breaker?

5

paint colour for max curb appeal

11

How could be best layout our kitchen/diner/hallway?

10

roof lantern location

5

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.