Uneven, stone steps down to my flat..........how to replace?
Heidi Cullen
6 years ago
Featured Answer
Comments (25)
Related Discussions
What would you do with the oak panels in my dark hall?
Comments (51)We have the same type of panelling in our hall and it was oak the same as yours with an oak floor. It just started to feel quite dark and drab but we hesitated to to do anything for fear of messing it up. In the end we painted all the panelling in Farrows French grey, left the doors and floors wood and painted the sides of our staircase and the spindles in Farrows clunch but left the newel posts and the bannister rail as wood - looks like a different hallway - I have never regretted painting it...See MoreReplacing an existing raised patio with a basement room. What roof?
Comments (4)I agree with Mayfly182, although maybe a little harsh. I'd approach an Architect in the first instance and they will be able to advise on the structure of the building required as a whole, it won't just be the roof that they will concentrate on. It will entirely depend on many, many factors, not least of which, would probably be underpinning of the existing structure and of course drainage. It's not just an extension, the underpinning is what adds thousand to the project. ( as in literally doubles it ) I don't know what your budget is, however, it would be much, much cheaper to extend at current ground level to the left or right of the existing building. Have you explored that as an option?...See MoreMy visit to Wren. Opinions welcome...
Comments (43)We've ordered a Wren Kitchen (Milano too) and so far so good for us. I love the design we've come up with together, they've been more responsive than the smaller local companies we spoke with, and more creative than the Howden's plan we had. We got quotes from 4 companies - handle-less kitchens were dearer than shaker etc in all. Wren have a 'list price', and a price that they say is the 'discounted' price which is the one they offer customers. Discounted is closer to the actual price, but you can still negotiate - they have the space to move. I hate that they do the whole 'this price will be held for 24hrs' routine (ugh! I wish they'd cut that out.), however they will price match if you get a better quote for a similar kitchen elsewhere. Initially their designs were fine, but nothing startling, but with a bit of thought and a moving things around we've got something really creative. We've had 4 x 2hr slots with our designer to get to a point where we're proper excited about our plans. They're also had a surveyor come round to measure up. We are using our own fitter - he's someone who's done a lot of work locally on friends kitchens so we've seen the quality of his work. When I was seeking advice on the quality of Wren kitchens v others from him, he said they are as good quality as any, and kitchen issues are usually a result of a bad fitter rather than a bad product. Our fitter will be meeting with our designer over the next couple of weeks to run through everything with them. Trust Pilot reviews for Wren are good (8/10), and they've won 'kitchen designer of the year' or something similar from one of the interiors magazines recently (sorry I can't remember which mag!). It seems that the main issue with them is their post-sales customer service when things go wrong so we'll see how it goes and report back. Colleen your update has prompted us to check our measurements again with our fitter. If you're keen on the Wren kitchen I'd say trawl through the Photos section on Houzz and see if there's anything that takes your fancy in there, then see the designer again and play with the plan. I LOVE Wren's midway shelving (thin shelves which sit under the wall units). I'm getting those, with lockers instead of traditional wall cupboards. It's rotten to hear of any bad experiences though - it always feels like a gamble when you're spending thousands on your dream kitchen....See MoreWhat flooring to put down over existing white ceramic tiling...
Comments (17)Hi, Is there anything that makes you think it would be difficult to remove and replace the existing tiles? It looks like you have a wall hung wc pan (hard to tell in the photos), so no problem with that, and the tiled bath panel helps as well. If there was electric underfloor heating then it would make sense to avoid lifting the existing but otherwise its the best way to do it. If fitting a new floor you would want to have new sealant to the perimeter of the room, floors to wall, anyway so that would cover any join between the new floor and existing walls. Personally I would remove and replace with whatever you like, tiles amtico etc. etc. Then you have a brand new floor that you know will last. Sheet vinyl over the top of the existing will show the indentations of the existing grout lines and anything else will add unnecessary height to the threshold and may be uneven. Good luck with the work and make sure to post up photos when its all done....See MoreHeidi Cullen
6 years agoHeidi Cullen
6 years agoChristine May Interior Design
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years agoHeidi Cullen
6 years ago
Christine May Interior Design