amitoco flooring or engineered flooring
NYC
6 years ago
last modified: 6 years ago
Featured Answer
Comments (6)
Daisy England
6 years agoRelated Discussions
Advice - Oak engineered wood flooring - fading
Comments (17)Hi Hu, Definitely looks like the sun/uv has warmed the oak up, like with most natural woods they will change colour over time. You could consider oiling the floor lightly on both sections but concentrating mainly on the lighter area as this will darken the wood slightly. I would suggest sanding if it was a solid oak floor, however as it's a 3mm solid (I'm guessing on this) I wouldn't risk sanding it. Definitely consider oiling it and if possible I would remove the rug for a while especially on brighter days to allow the colour to even out. I hope you are able to sort it. Charlie @The Kitchen Lady UK www.thekitchenladyuk.co.uk...See MoreEngineered Wood Flooring - oiled, brushed, lacquered etc
Comments (5)This breaks down the finishes if it helps. The lacquer can also be satin or matt, the latter being the most popular. I’ve had a lacquered floor for 8 years. It hasn't faded but i have caused a couple of scratches (my own fault with a choice of door stop) but is resistant to dog claw scratches although can be quite slippery for them. It probably depends on the price point but make sure you disregard any planks with knots that have been ”filled” as the filler will come out after a few years of repeated hoovering https://www.luxuryflooringandfurnishings.co.uk/engineered-wood-advice-finish...See More20mm lacquered engineered oak flooring recommendations
Comments (1)Take a look at the Naturally Oak website. They offer a wealth of choice. Not sure it’ll fit in with your budget but their service and choice is great. Here is the link: https://www.naturallyoak.co.uk...See MoreMost durable engineered wood floor?
Comments (10)Hi There are a number of factors to consider when trying to establish how to keep engineered wood floor 'nice' for a long time, not just the thickness. Also depends if the floor has underfloor heating beneath, is glued down or floated and the sub-floor/ if the floor level, alongside common issues such as damp. But speaking just from a perspective of keeping the floor 'nice', firstly on a brushed and oiled floor we always recommend to customers 2 coats of Treatex Ultra Hardwax Clear Oil after the floor is laid, matt or satin finish 2.5L will give coverage of around 50m2. This will give the floor extra protection against daily use and general scuffs. https://www.woodfloors4u.co.uk/product/treatex-hardwax-oil-clear-2-5l/. Buying any flooring is a considered purchase and going the extra step along side regular maintenance can make all the difference to the flooring looking 'nice'. Also consider using specifically adapted wood flooring cleaning products such as Treatex Floor care, tradition floor cleaning brands can often damage the floor and in worse case scenarios irreparably. https://www.woodfloors4u.co.uk/product/treatex-floor-care/. As mentioned in the thread the thickness of the board can help, generally speaking a 6mm top wear layer with 20mm overall board should suggest longevity regarding density and sanding options. However the make up of the back board must be factored in when considering strength of the board for example our engineered products generally use a multi-layered berch ply which is extremely strong. Therefore only considering a 20mm board maybe not be ideal or cost effective as you also have to consider the install process/ method which plays a large part in the floor being kept in situ for a long period of time. In theory a well maintained floor in a non commercial or high footfall space certainly should not need sanding prior to 10 years and probably even longer. We have a number of products at different heights and can provide support if you would like to discuss further....See MoreA S
6 years agoKerry Donnelly
6 years agosarah67534
6 years agoWoodpecker Flooring
6 years ago
LTS