skip to main content

floor transition for engineered hardwood to porcelain tiles

6 years ago

we have a large open plan space of which half is engineered hardwood, light oak in color, and the other half has light porcelain tiles.

what would be the best strip for transition? we are trying to get a strip that matches the wood but are unable to find it in any retail store.

the two floors are not necessarily at the same height.

Comment (1)

nasmijati
6 years ago
If you find a solution, let me know. I have the same situation and just live with it.
Related Discussions
Talk to me about hardwood floors
Q
Comments (6)
I have been a wood flooring professional for over 30 years, so my response might be more detailed than you want! I'll break it down into several issues and you can choose which bits might help you the most. Color: If you have children, a medium stain/wood might serve you better because dark floors show dust and dirt. Wear: A wood that has a stain on it that is much diferent from the wood's own natural color, will show scratches more than a wood with no stain. A matte or semi-gloss finish will show fewer scratches and wear. Composition: What is your subfloor and where are you located? Both these factors will help determine the material to use. Solid- This flooring is made from pieces of wood that are one solid piece from top to bottom. So, if you want oak, the wood is all oak. It can come from the mill already stained and finished (prefinished), or it can be finished at the jobsite after being installed and sanded. Engineered- Engineered hardwood flooring is constructed of two components, a ‘core layer’ on the bottom, topped by the ‘face veneer’. The veneer, or wear layer can be of differing thicknesses. The thicker the wear layer, the more times the product can be sanded. The core layer is constructed of multiple layers of wood which can be of the same or of a different species, glued together in a cross-hatch configuration. This cross graining provides greater dimensional stability, minimizing the expansion and contraction that natural wood exhibits when exposed to varying moisture levels and temperatures. It can come from the mill already stained and finished, or it can be finished at the jobsite after being installed and sanded. If you are going to install one area now and another later, you might want to choose an unfinished product that can be sanded and finished at the jobsite. You also want to ensure that you keep a record of the materials used on the first section so that you can match the second section after the color has changed. They will both end up the same (or at least very similar) color after a few years, but they will both change over time. The other way that you can ensure that they match is to purchase enough prefinished (which has the stain and finish applied at the factory/mill) material for both areas at the same time. For the best match, mix the wood from all the boxes for the first floor, then repackage the rest. Store it in a dry place until you are ready to install it in the other area. Purchase products and hire a professional that are members of the National Wood Flooring Association. They set the standards for and provide education for our trade. They offer certifications in installation and in sand and finish which oprovide homeowners further assurance of skill and competence.
...See More
Porcelain Tiles in very large open plan area, inside and out.
Q
Comments (21)
As a tile importer and retailer, it's very rare for a porcelain tile to crack if installed properly. I'd not recommend juggling your Le Creuset to test the theory though... More and more tilers are using a decoupling matting such as Durabase to take as much movement out of the tile as possible. We also supply flexible adhesive and grout, so with a properly flat floor, it's rare for us to get a call from a grumpy client. We supply a lot of large format "infinity" look tiles, where you have an identically sized anti-slip External version of the Interior tile. Most are 8-9mm, so need a concrete base that mirrors the internal floor. If there is a 20mm version, then a sand & cement base can be used. As for kitchens, always tile the entire floor before the kitchen goes in. This means that the kitchen installer has a blank canvas to work on. It also means that the floor is completely sealed, so the chances of liquid ingress under the tiles (under the units) is pretty much nil. Finally, it also means that if you have any white goods that fail under the work surface, they can just be slid out, rather than having to remove what could be long an heavy lump of marble or granite to get them out. The additional cost will be negligible compared to an insurance claim...
...See More
Wood effect tiles vs hardwood
Q
Comments (11)
@ House 2 Home Design - The simple answer to that question is no. If the floor is installed correctly with the necessary expansion gaps at the perimeters then there should be no problem. Problems do occur when an expansion gap is not installed and this can causes the floor to swell upwards as the wood expands. It should be noted that the size of the gap differs from product to product and is concealed by the skirting. Another mistake which causes problems with solid wood floors is where the skirting is fixed to the wooden floor without leaving any tolerance and this prevents the wood from expanding and again causes the floor to swell upwards. It should also be noted that even with an engineered wooden floor an expansion gap should always be allowed. With regards to humidity, it is not that great in a kitchen area on a constant basis and I have installed solid wood flooring to rooms that are adjacent to swimming pools; now that is a high humidity situation! :-) In the case of very high quality solid wood floor installations I have often stuck the floor to a plywood sub-floor, however this is not a common requirement for standard residential projects. I hope that this helps.
...See More
hardwood Vs engineered wood flooring
Q
Comments (17)
I actually buy my flooring from a company in Romford, so this works out lovely. Their name is wood floors and accessories (WFA) If you let them know Rob Jones from RJ Flooring told you to get in contact - they will look after you. Any issues, let me know and I will help any way I can. Their products are the best around and they have a show room ect so you can see what you're buying and how its made https://wfa.uk.net < thats their website, every one there is really helpful.
...See More

Sign Up to Comment

Sponsored

More Discussions

How could I improve the look of front of our house?

40

What to do with my loft space?

5

paint colour for max curb appeal

10

Top garden ideas

5

kitchen, utility, lobby layout advice

4

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.