How to achieve this paint effect?
theskywasgreen
5 years ago
Featured Answer
Comments (11)
Related Discussions
Light Pine Floor finish: how to achieve?
Comments (2)Hi Trinity, What a lovely project! We have achieved this look by using a 2 part treatment, it's called Lye & Soap. A company called Auro supplied ours (they are one of the main suppliers, and give really concise information and support on how to apply). The look we wanted was like the very 'Scandi' Dinesen boards, and this is how they treat their boards. To start with, you will need lye, which bleaches and removes yellow from the wood; then the white soap which cleans, re-whitens and seals the boards. The process is done with a brush or a foam roller and is really easy! The end result is very clean, matte and fresh looking (you tend to find with oils and paints that the end result can look a bit tacky/thick and heavy) But the Lye & Soap is very thin, and just really absorbs into the wood, whereas oil can tend to sit on top. I hope this helps! Good luck! it would be great to see a completed photograph! Holly @ MillChris Developments Ltd...See MoreDoes anyone know how I can achieve this look with tiles and wood floor
Comments (12)Tracey, those are encaustics which tend to be 18-20mm in depth, your wood will most likely be engineered ply if you have underfloor heating and depths vary 12mm upward. If one or the other substrate needs to be built up to accommodate the other that is possible. Be aware there will be some movement between the two, more so if you are using long boards, less with parquet, so consider how best to deal with any movement or expansion between the two. There are plenty of products available for this. Make sure your encaustics are sealed correctly. You could also find the cleaning regimen of the two finishes may be very different. Lithoflin for encaustics - and oil/wax for an oiled floor, that's not a great combination, so perhaps an easy maintenance wood might be better in the long run....See MoreHelp! How to do I get this effect on plastered walls?
Comments (4)I think this is what they used to call rag rolling many years ago. A brush as on the above link does a similar effect too. You used to be able to buy a roller with a 'rag' attached and use it to paint on the wall that would give you the effect. I'd also practice it on something before attempting the wall in question....See MoreInside/Outside Flooring effect using LVT
Comments (2)Thank you. I think deep down I thought that, but was hoping to be proven wrong, or that someone had used lvt tiles inside and continued with a matching Porcelain tile outside. I don’t think my original question was very clear!!...See Moretheskywasgreen
5 years agoARC Bespoke Interiors
5 years agolast modified: 5 years agotheskywasgreen
5 years agoARC Bespoke Interiors
5 years agoARC Bespoke Interiors
5 years agoARC Bespoke Interiors
5 years agolast modified: 5 years agotheskywasgreen
5 years agorachelmidlands
5 years ago
Carolina