skip to main content

Cleaning Tips Furniture DIY

Restoring matte finish

5 years ago

Trying to remove a stain from some kind of hammered metal, I rubbed too much and now that area is all shiny and glossy and sticks out like a sore thumb. Is it possible to restore the original matte finish which is also darker and more vibrant? Any suggestions are welcomed. Thanks.

Comment

Related Discussions
I think I hate our newly restored edwardian floorboards..
Q
Comments (38)
Georgina, you are most welcome. Yes, I saw that you said in your initial query that you had lacquered them and did not want to sand it all back, hence my suggestion for the least messy option (otherwise yes would be better to sand it all back etc etc like others have said but let's be practical not perfectionists). Yes a tinted lacquer, yes I'm sure you can buy it, I've mixed it myself but best to just buy one but beware not to go too far the other way and take tiny steps. Paint a bit that's going to be under a desk etc and leave it for days to dry and look at it in different light etc. It's not ideal, but I suggest you use the same clear lacqer and add a tiny bit of tinted one because you are painting on a darker colour already so experiment with small amounts of each, keeping track of how much you have put in. (I mix my own wall colours so have just learnt to give it a go in small portions). You also mention wanting a black and white rug, these colours will clash with the wood (colour theory) and make it look even more orange so best to use a colour that tones more. It's hard to tell the exact colour from the photos but go with warmer deeper colours which will then tone down the orange rather than clash with it and make it look cheap and more orange. So if you want to go dark then a rich chocolate brown with some creams, khaki and even a bit of burnt orange for example will make the orange in the floorboards recede.
...See More
hallway finished with Colortrend Silver Birch matt,doors Colortrend sa
Q
Comments (6)
actually the handrail should stay as is,just a spindles and balusters should be painted in white. the doors should be changed. that's a next step.
...See More
Oil finish vs Matt Lacquer?? (sanded pine floors)
Q
Comments (1)
Hi Dee, Lacquer vs oil (& hardwax oil) is one of those industry topics on which there is rarely consensus on which is best. The answer is never black or white and each finishing type has it's own advocates on either side. The good news is that the technology behind oils, wax/oils and lacquer finishes has moved on significantly over recent years and it is possible to achieve most of the looks you desire regardless of the generic type of finish that will protect your floor and maintain it's appearance (though note later the comment about the 'yellowing' of oils). Aesthetics aside, we also discuss with our customers that they might want to consider a few of other factors when choosing between an oiled, hardwax oil or lacquered floor - the main ones being the maintenance regime required to keep the floor in top condition, and repair options if the floor finish is damaged e.g.heavily scratched or scraped. Lacquered floors In very general terms, lacquers are very resilient and work by forming a tough protective film on the top surface. They require little in terms of a maintenance regime - brushing and the occasional clean with a damp cloth and a proprietary cleaning solution. If the lacquer layer is damaged it is difficult to effect a repair that is as good as the initial finish - this is especially true if the floor was supplied with the lacquer already applied (pre-finished). Sometimes the only solution to gain an acceptable repair is to sand the floor back and apply a new lacquer finish. Some people refer to lacquers as 'varnish'. Oiled floors Oils soak (penetrate) into the timber rather than sitting on the surface and are considered to be less resilient than lacquers. They also require regular maintenance - regular in this sense depends on footfall (traffic) and other environmental factors but could be as little as once every 12-18 months or several times during the same period. We say to our clients that an oiled floor needs 'feeding', by which we mean that it will require more oil over a period of time to keep the floor in good condition. Some oils can turn slightly yellow over time which needs to be considered if you are applying them to a light coloured floor. Any damage is easier to repair and to blend with the original finish - often a light sand and the application of more oil to the area is all that is required to achieve an acceptable finish. Hardwax oiled floors Hardwax oils are a relatively new product in the floor finishing armoury and were formulated to try and offer the advantages of both a lacquered and an oiled floor in that they soak into the timber (like and oil) whilst still leaving a protective layer on the surface (like a lacquer). It is for this reason that most advocates rate hardwax oil over oil alone. Arguably the wax layer isn't as resilient as a lacquer, particularly in areas of high traffic, but in most domestic applications it performs adequately. There is some opinion that hardwax oils look more natural than lacquer, although modern 'super matt' lacquers are also excellent in this respect The maintenance of a hardwax oil is akin to that of an oiled floor and likewise they are also easy to repair. Hardwax products, have an element of wax incorporated which when buffed creates a glossy sheen. This means that the look may be less matt than you might want, however a hardwax oiled floor can be buffed until the desired sheen level is achieved - something that you cant do with a lacquered floor. The wax layer can also trap and encapsulate dirt which will make the floor look dull and dirty, hence why a regular maintenance regime is required. Lacquer and oil finishing brands Bona and Osmo are the brand leaders in this area, however there are quite a few others, all of whom produce finishes, stains and aftercare solutions that are readily available online, these include the likes of Woca, Dr Schutz and Rubio. Sticking to one manufacture ensures compatibility across the main finish, stains and the maintenance/cleaning products. Scandi look a search online will give you different opinions of what constitutes Scani but most agree on wood and lots of it. Some suggest white or white oiled floors although natural is also fine, and there doesn't seem to be much guidance on whether the finish should be matt or gloss floors - so I don't suppose there are any hard and fast rules. A while oil will generally allow the grain to show through and you can vary the levels of opaqueness from almost transparent through to highly opaque. Below is a white lacquer on oak - this is opaque but not so much so as to obscure the grain of the blocks. If you want a highly opaque white also consider floor paint as an option to go over the top - that way the floor will look like white planks as you won't be able to see any of the grain or features of the timber floor beneath. It also looks pretty cool as it starts to wear away over the years revealing the wood underneath. a typical example of a painted floor is shown below. Good luck with the project Cambium Floors
...See More
I think I hate our newly restored floorboards obsessively
Q
Comments (22)
Not sure on the exact science of this but use Tea! From what I can gather is that new pine lacks in tannin which is present in most woods particularly woods like oak, mahogany etc. but not so much in new pine. Over time the tannins do balance out but could take many years hence why the older floorboards (which are lovely btw) have a much more even tone. Solution is to wash freshly sanded new pine with a fairly strong brew of black tea (quantity/ratio not sure). Tea contains tannin so basically you’re adding it to the wood before staining, varnishing, oiling and so on. Might be a bit late if you’ve already oiled the zebra floor boards as it needs to absorb into the wood but thought I’d let you know if you plan to do steps. Do bear in mind that this finish may appear darker so perhaps use a lighter stain and absolutely test first. Here’s a link which isn’t great but sort of explains: https://sawsonskates.com/tea-stain-wood-furniture/
...See More

Sponsored

More Discussions

Proposed floor plan help please

35

How could be best layout our kitchen/diner/hallway?

12

Advice re updating a tiredbedroom please

6

How can I fit an induction hob in place of a range cooker?

5

Help…dilema I need some ideas

3

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.