Internal woodwork, stained MATT or GLOSS? Quick help needed!
archiekennedy
5 years ago
Featured Answer
Sort by:Oldest
Comments (11)
Daisy England
5 years agoRelated Discussions
Help me revision my exterior for maximum kerb appeal
Comments (23)Time to revive this! Having had consultations with not one but two architects (Karin & Groveraxle were both right; not very costly and money well spent) who both offered up good suggestions and helped me come up with a plan of work for the house. I have had building contractors tendering for the work and have just this morning settled on the firm I am going to use. Work on the house will begin before the end of the month and is scheduled to take 6 weeks. There will be no structural changes to the outside but a little bit inside which will give me a bigger kitchen and will open up the living space somewhat. Also master bedroom is being reworked to add an en-suite, structural reworking of hallway and cloakroom - it will look so different and yet quite evidently the same house which is what I wanted :) Lots of cosmetic changes to take place externally and internally which is the bit I have been looking forward to. You are all invited back to help me make firm decisions about paint colours, wood varnishes, light fittings, flooring type, worktop choice et al! The journey continues :)...See MoreHelp with modernisation project!
Comments (12)The house looks from the pictures to be a period property or period house styling, the front door style and the fact that you have a dado rail. Keeping that in mind you can go for a more contemporary colour scheme the grey you mentioned, using a two colour scheme as you have the dado rail and as was popular in that era. A slightly darker shade at the bottom a shade lighter on top. By using either Farrow and Ball for example skimming stone at the top and then Elphants breath at the bottom. Or you have Sanderson mist flower and smoke tree, Little Greene also have a great range shallows and Inox. You will need to get their colour charts and check the colours for your hall as light and position will effect the colours. I would agree if you go with the grey then a striped carpet incorporating greys would look lovely but if possible have it as a runner with rod, they come in chrome. This combines the house era with a contemporary touch. You can either keep the striped carpet throughout the hall or go for tiles. You have a dog so wood would get marked and scratched. As for the curtains not really great for a hallway maybe see if yo can use them elsewhere i the house. Plenty of fabric to make a bed runner and cushions. I've added a couple of images to help visuaise. hope this helps...See Morecleaning matt kitchen cupboards
Comments (148)No! Don’t use pink stuff paste or a magic eraser! Pink stuff spray is fine but not the paste. We have spare doors at work and have done tests on them. You should not use a product that is harsh such as paste because in time it will take the surface of the door off. If however your doors are so bad that they are ready for replacing you have nothing to loose. I’m now monitoring the removal of marks with baby wipes. For some strange reason they seem to shift a multitude of sins....See Morepainting over a stained doors?
Comments (9)I think the uses of primer and undercoat can be interchangeable. Hopefully this explains a little better: https://www.craigandrose.com/all-articles/when-do-i-need-to-use-an-undercoat-or-primer-when-painting/ I generally use a primer for difficult surfaces such as melamine furniture, gloss paint etc. or in your case it would be the knots on the doors as they have the potential for resin bleed. The undercoat is to even out patches and provides a solid background colour on which to paint the top coat and also to provide good adhesion for the top coat. A bit like painting on a blank canvas. So I think you’ll be fine with just using the undercoat after a light sand but do use the primer on the knots because a resin bleed may not be immediately obvious but over time they can appear (like little orange circles), more so if exposed to sunlight or humidity. Can’t remember how you test for wax but I think if you flick some water at it and it beads then you’ll know if they’ve been waxed or not. Hope this helps a little....See MoreUser
5 years agoRibena Drinker
5 years agoarchiekennedy
5 years agoartisan_1
5 years agoEmily
5 years agoPhilip Clay Kitchen Designs LTD
5 years agoIkonografik Design
5 years agoSonia
5 years agoEmily
5 years ago
Emmanuelle