Flooring details

Helen Cox

5 years ago

Could you tell me what the flooring I'd please? I see you are based in London, do you deliver to Norfolk? Thank you

Tailor Made Patina · More Info

Sort by:Oldest

Comment (1)

PRO
The New & Reclaimed Flooring Company
5 years ago
Hi Helen,

This residential has been fitted with our :

Highland Manor - https://www.reclaimedflooringco.com/product/highland-manor-2/

We can deliver to Norfolk.

Should you have any further questions and require assistance moving forward; please contact loisann@reclaimedflooringco.com
Related Discussions
Help needed with Hall flooring in converted flat
Q
Comments (46)
Hello Robin, No need to remove anything just add a huge mirror on the right hand wall with some height as I suggested earlier in the thread, then you will get a border reflected and also the arch! It is quite important to work with what you have, and you can cleverly with the oversized mirror! eBay have a shop for them! Once you paint frame to match the walls you will see how useful it could be. Possibly 8ft by 8ft as high as you can go to get the arch in! It's what I would do.. :))
...See More
Detailed plans done
Q
Comments (8)
Hello John, sorry, your questions are a bit vague.Where in the country are you based? London and the south will be more expensive than further north. If it's mainly internal fit out + new windows and doors [and roof windows] allow about £1650 + VAT / square metre of gross internal floor area. This is based on one builder completing the whole project for you for one lump sum and also based on mid range quality of build and finish. Obviously, if you are after high quality bespoke then it will be a lot more.If you are sourcing materials and organising trades yourself this will reduce costs but add to your time required and hassle factor. Assuming you are after mid range stuff then Howdens kitchens are ok as are some of the internet bathroom suppliers. Having looked at your plans briefly would the new drain run from the ground floor wc be more straight forward if went out to the right and down the parking driveway to the manhole? I assume the existing factory floor is concrete and therefore you will have to break out the concrete for the new drains? Hope this helps.
...See More
Not a question, just details of my house project
Q
Comments (64)
Well as you can imagine, work stopped a few weeks ago. I've managed to get some supplies delivered so I'm doing the DIY bits. I'm currently boarding out the dining room ceiling to slightly lower it and to install downlights. The wiring and boarding should be done well before my builder us allowed back. Then I have to source the kitchen all over again!
...See More
Help with bathroom tile design
Q
Comments (30)
Hi, if you did that, the box would be a very prominent feature and unless the box was the same width as the window sill you would have one surface slightly wider than the other which would look unbalanced so ideally I would leave around 100mm - 150mm between the two surfaces as in the photo. That said, it does depend on the height of the window sill from the floor. These details can be difficult to call which is why we use software and get a 3D visualisation. In answer to your second question, yes you could use chrome or satin nickel finish strip or a glass pencil tile to finishes the top of a tile very nicely and avoid that awkward edge created with a ceramic tile. You could use the strip on its own or with a mosaic of some sort - the pink and grey scheme was an Art Deco style set we did for a bathroom showroom. Chrome strip is versatile and can be used to add that touch of sparkle to an otherwise neutral and understated scheme .
...See More

Flooring details

Comment (1)

The New & Reclaimed Flooring Company

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US