how to hide a toilet in the kitchen
smc84
5 years ago
Featured Answer
Sort by:Oldest
Comments (6)
User
5 years agoRelated Discussions
how to hide old kitchen tiles
Comments (2)If course it depends on budget but replacing them may not be as expensive as you think....See MoreHow best to hide these electrics above our Victorian front door?
Comments (24)Hi - in response to Carol's comment, I attach a photo of what we've done so far. We had the power company come in and move the meter down slightly (that was the bit on the left in the original photo above) and put it onto a smaller backplate for us. Then we had our electrician in to put in a new fusebox. Then we had our carpenter in to make a small box picking up the moulding on the inside front door, which also matches the doors leading off the hallway. We had the plasterer in to make good the area. So far that's where we are as we don't want to paint until we do the whole hallway, and first we need to change the radiator from the old flat panel one to something more in keeping with the property. I particularly resonated with Jonathan's comment above, with the thought that the eye wants to 'read' the ceiling and floor details...we felt a big box going across the whole top of the front door would feel a little 'top heavy' - as we came down the stairs and as you entered the hallway from the kitchen. We are pleased that the footprint of the whole thing was massively reduced. It turns out to be a handy little place to stash a torch as well. Thanks for everyone's comments - it was very much appreciated. Maybe I can send a photo of the final final result once decorated!...See MoreFlush engineered wood floor - ideas on how to hide the expansion gap
Comments (8)Which way will you have the flooring running, is it running parallel with or perpendicular to the sliding doors? If parallel to the doors you will need to leave a minimum 10-12mm, looking at the room length, but if running the other way and the ends of the boards were facing the doors, you could leave a smaller gap of 5-6mm, in which case you could have it professionally sealed with silicone, with a colour match to give a near perfect finish. If doing it this way get the fitter to use a full length spacer to ensure a perfectly straight edge....See Morehiding the kitchen sink...
Comments (31)Pending confirmation of where the WC can go on the other side of the Utility wall, I decided to shrink the bathroom down to make way for a better shape of utility. The OH is never interested in looking/discussing the designs but the other night, made a suggestion that would work if I can make the room slightly bigger. So now I propose my bathroom at 6' x 7'4 (posting on the other thread for Minnie) and the utility room would be 110cm deep x 7'4 wide. Keeping the original opening of that brick outer wall (currently a tall window in!) will save spending more on building work and bigger steels as well. What do ya think?? It will have a sliding door on to block out the washer/dryer noise of course... drying racks on the wall above the sink to hold pans/delicate glasses. rad for drying tea towels and anything else above it. Plus the ceilings are 2.75m high so I have lots of shelving/storage space for anything I can't fit in the kitchen. Loving it now...See MoreUser
5 years agoOnePlan
5 years agoAngie
5 years agoSonia
5 years ago
Lifestyle Kitchens