skip to main content

Sensor Kitchen Tap

2 years ago

Hi, has anyone recently installed a sensor kitchen tap? I love the idea of them but they seem to have mixed reviews. Also, I've read they can lower your water pressure.
Thanks

Comment

Related Discussions
Copper finish kitchen tap (3way)?
Q
Comments (2)
I think the key to being creative is knowing what you like, what you can buy, and then accepting that usually it doesn't exist.................so go down the 'create it yourself route'. By that, I mean have a plumber make what you want out of copper fixings, then you can have an older looking type of tap set up. Copper is easily bent and soldered so you can pretty much have whatever your heart desires with the right guy to install it. I think you'll need to get your head around the fact that 'copper taps' are a new thing, old fashioned taps were brass and still are. You can mix up the two metals without any problem. Just get creative and get a good plumber!
...See More
Cooper kitchen tap with stainless steel sink ?
Q
Comments (8)
The brass from the lights, copper taps and stainless steel sink maybe too much, and especially so if your switches/sockets are a different finish like polished chrome ... The copper tap could work with a SS sink if you can add copper accents elsewhere and limit the finishes to the two.
...See More
Kitchen Tap - Moderate water pressure
Q
Comments (0)
Hi I have a gravity fed system with the tank in the loft of a 3 storey town house. We are in the process of re-locating the kitchen to the ground floor. I have been told that the hot water pressure in new kitchen is 0.7on the hot feed, we had hoped to have the Franke wave pull out tap which states minimum 0.5 but id rather not have it if the hot flow is inadequate to wash pots etc. any advice/experiences?
...See More
Kitchen sink tap and the gap I need between the wall and sink
Q
Comments (6)
HI Sonia, Thanks So my sink will be an undermounted and the tap hole will be made in the worktop itself.... This is the tap I have got: https://www.tapwarehouse.com/p/clearwater-rosetta-pull-out-filter-kitchen-tap-pv?sku=clearwater-rosetta-chrome-pull-out-filter-tap-var Curious if I should be asking for some more space at the back the sink Depth is 430mm. Standard worktop I assume is 600mm and undermount sink depth is 430mm which doesnt leave a huge amount at either end, so I'm unsure how this design has been achieved and if this is how it should ideally look?
...See More

Sponsored

More Discussions

Large sliding door or keep small French door and window

36

How could be best layout our kitchen/diner/hallway?

12

Opinions and suggestions on Howdens Kitchen Design

9

loft conversion layout help

2

Kitchen diner garage access help

1

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.