Brackets supporting upper cabinetry

lesliekatzman

6 years ago

These are so pretty. Are they custom or did you get them from Osborne or a similar resource? Thank you!

Warmington & North · More Info

Sort by:Oldest

Comment (1)

PRO
Warmington & North
5 years ago
They were designed and fabricated specifically for this project. I can't say for certain but its possible that Osborne has something similar. Thanks,
Related Discussions
Challenge - Cool Ideas for DIY legs for Ikea TYNGEN Tall Cabinet
Q
Comments (16)
The legs are not just tubes, but incorporate mounting plates at the top for two screws, corresponding to the underside of the cabinet ...If I chop the existing legs I will have just created two pieces of square tubing...There's be no way to suitably secure these to the cabinet.. Though ideally something like this would have been the answer....
...See More
Help with fixing cantilever oak block breakfast bar to granite worktop
Q
Comments (9)
One or two observations: Oak breathes, in as much as when wet it will expand and when dry it shrinks, that's why it is good for boat and barrel building, when wet the gaps close up and make it watertight. What that means for a worktop is that unless the wood is stabilised (soaked through with epoxy) it will expand and contract, if glued to the granite that means when expanding it will warp, staying still where the glue is and bending downward, not much but it will. Perhaps a less porous wood could be better, bamboo is good, then, if the counter top end is flush, you could screw and/or glue a stout batten of matching material to the end of the counter to add support ( extend it out past the front of the counter to ad support to the overhang) then glue the block to the granite with epoxy and screw up through the batten.
...See More
Under stairs drawer/shelves
Q
Comments (61)
Funnily enough I was just thinking about kitchen artwork. My sis got custody of decorating with big Banksys so I'm not allowed any of that ;-) I do like this artist https://www.google.com/search?q=Georgia+Cox+artist&client=ms-android-vf-gb-revc&prmd=isnv&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiY_-zgvsriAhUoRBUIHaHeCoEQ_AUoAXoECA8QAQ&biw=360&bih=657 But originals might be a bit much for the kitchen (and my budget!)
...See More
Kitchen peninsula too close to door...
Q
Comments (25)
sheesh I thought with a rectangular shaped kitchen things would be simple! This is definitely a learning process! I think if if we Switched to the 600 mm cabinet instead of the 900 corner unit we’d have to have a 50 mm ’filler’ unit or something to allow the over door to open enough....hopefully I can get him to just hold off on putting more things in until it arrives so we could see how it works....I have such limited time outside of work and don’t have a job I can just swing an hour off from to go to showrooms and thints, so I just ordered the range cooker online after reading reviews. They all seem to come in either 90, 100 or 110 cm, so I just went with the smallest ‘standard’ one. when we first reserved the house I asked if I could modify the kitchen a bit, specifically put a range cooker in. He said no problem (it’s a small local developer, not one of the big companies) and that I could work out all the plans with their kitchen planner....I spent about 2 hours with her and went through a lot more emailing her back and forth to get it right...some good that’s done! im thinking the range cooker along the wall won’t work either unless I lose the peninsula thing altogether because there’s not enough room- which would sacrifice a load of counterspace....unfortunately we need the door to the living room otherwise there’s no way between the kitchen and living room without going outside! The ground floor layout is below although the kitchen plans have since been updated...
...See More

Brackets supporting upper cabinetry

Comment (1)

Warmington & North

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US