3D cork board cube
Contemporary Home Office, Hamburg
Tricks on the eye The 3D cube cork board is a very unusual wall decoration – and also a super practical pin wall!
HERE’S WHAT WE NEED:
Cork board, 50x100 cm, 10 mm thick; schematics (uploaded to our project), cutter, ruler, geometric triangle, pencil, cutting surface, paint brush, deco paint in yellow and light blue, tesa® Masking Tape PRECISION INDOOR 25 mm
AND THIS IS HOW IT’S DONE:
> Transfer the schematic in correct scale to the reverse of the cork board and carefully cut out the shape. Pencil in the internal lines from the schematic on the front of the cork board.
> Mask one of the areas with tesa® Masking Tape PRECISION INDOOR and paint the area yellow. Peel off the masking tape and leave to dry. Mask the second colour area and paint it light blue.
> Peel off the masking tape and leave to dry.