Hello,

We're planning a new house build and I'm trying to come up with some bathroom layouts that are wheelchair accessible. No one is currently in a wheelchair, but it could be a possibility that someone is someday and it seems like it would make sense to use a little extra space to make sure this is possible.

I have been reading the ADA recommendations and have created a couple of layouts and I'm wondering if you could share some insight as I'm sure some of you know more about this than I do. I haven't really found a good source of accessible residential bathroom design guidelines, so if anyone knows of one, please post it!

Here is the Master Bath layout:

{{attachment:1385838}}

Each square is one square foot. The circle represents a 5 foot diameter turning radius which is what the ADA recommends. I did not include grab bars on the diagram but in reality they would be installed around the toilet.

As far as I can tell the bathroom itself meets the requirements for wheelchair accessibility. If this were a real situation one may want to replace the vanity with a sink that would allow for your feet to go underneath it.

The shower is intended to a "walk-in" that a wheelchair could go in to (or a shower chair as it seems like that is normally what people would do?). I'm having trouble finding as much information on walk-in shower accessibility. Does anyone see a problem with how I did that? I have the doorway currently 36" wide in the shower but I'm thinking that that is probably wider than it needs to be. Could I reduce that to 32"?

The shower is larger than I would normally want if I weren't planning for wheelchair accessibility, but I'm not really sure how to get it any smaller while still planning for this possibility. Any insights are appreciated.

Here is the guest bath:

{{attachment:1385839}}

The tub is not designed to be accessible here, only the toilet. Again the circle is a 5 foot diameter turning radius. According to Plan 2B on this document it looks like the 5 foot diameter turning radius can overlap with the door swing as long as you can draw a 30"x48" rectangle outside the turning radius, which can be easily done in this diagram.

If anyone has any insight to share I'd be happy to hear it! Thanks.

basement

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US