covering ugly backsplash
6 years ago
Featured Answer
Sort by:Oldest
Comments (22)
- 6 years agolast modified: 6 years ago
- 6 years ago
Related Discussions
ugly cheap looking banister
Comments (40)Hi @robert-jones53, I do have the details, he was local to Petersfield, Hampshire so depends on where you are located. We ordered all the parts from this company called Multi Turn, in Twyford. They supplied and delivered all the parts and then came out on-site to measure and template the glass! Our carpenter then fitted the Glass. http://multiturn.co.uk/ ED - I appreciate this is an ancient post, but some reason people keep coming back. If there are no similar other posts out there then people will keep coming back....See MoreNeed help with backsplash.
Comments (20)Hello...great units...I've just ordered similar in cream (again!). In my last house we used bespoke acrylic sheets as splash back (and behind gas range) and I never had any problems with heat. However, for your own peace of mind you might want to get bespoke strengthened glass cut to size. I painted the inside of the acrylic sheet coral (to match the facing wall and it worked very well. This time I think I will use paper (gift wrap or similar...wallpaper might be too thick) with a small repeat pattern, perhaps a retro design, and paste this to the inside of the acrylic/glass. Affix with mirror screws and seal with clear sealant to prevent steam/condensation, etc... Acrylic is cheap to replace if your design preference changes after a few years....See Morehow to hide an ugly pipe in a WC?
Comments (9)Brilliant Carolina! Although sararoc would perhaps have to make some adaptations to the back of the cabinet to fit around the pipework. You couldn't resist adding some decorative finishing touches eh? :)...See MoreUgly wire trunking EVERYWHERE
Comments (7)Hi Beano, I think all of the HU accounts are just unnamed Houzz User accounts so there are quite a lot of them all with random numbering. As for surface mounted trunking there really isn't a lot you can do other than replace the trunking with something nicer looking or chase it in. You can get better looking trunking in a D shaped profile, it doesn't have to be the standard square stuff. The problem with changing to a conduit instead of trunking is you would have to re-wire every socket and switch to be able to thread the cables through the conduit. Maybe if the costs of chasing are putting you off you could do a room or a floor at a time, starting with the rooms you spend the most time in....See More- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years agolast modified: 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years agolast modified: 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago




Patricia Colwell Consulting