Future Powder Room

Reply to: In this case the counter was mounted at 2'-9". Withe faucet, Similarly, check the manufacturers cut sheets for the dimensions of the faucet set. They may have a recommendation for height above the sink. In this case we mounted it 9" above the countertop to centerline of the spout at the wall (6" above the lip of the sink)

Q

Reply to: It cam pre-finished. I would direct your question to Steelwood Design who supplied it. http://www.houzz.com/pro/steelwooddesign/steelwood-design

Q

Reply to: Jennloper05 Get a cut sheet of the vessel sink you want to use that shows the height of the sink above the countertop. Assume 3'-0" above finish floor ( but this could be higher or shorter depending on your height) for a standard undermount/drop in sink (2'-10" if ADA) subtract the height of the vessel sink from the 3' dimension. Good luck, Michael

Q

Reply to: Hello, thanks for asking about the Water Lily Vessel Sink. The color is listed as white in the product specifications. I hope this will suit your needs!

Q

Reply to: Thank you all for your interest in this bath design. I sourced the lights from Barn Light Electric, the wall-mount vanity was custom fabricated from remnant marble at Interior Stone, the vessel sink is from Waterworks, faucet is Rohl. Limestone plank wall tiles are Stonewood from Maestro Mosaics selected to feel a bit like weathered wood found at the beach, and floor tile is Edimax Absolute Space in blue from Best Tile. I used budget-friendly white subway tile above the plank wainscot. My favorite aspect might be the little recessed towel storage below, which I had planked seamlessly as a special little footnote in the design. :) lisa k. tharp K. THARP DESIGN - Fine Interiors www.ktharpdesign.com

Q