Jennloper05 Get a cut sheet of the vessel sink you want to use that shows the height of the sink above the countertop. Assume 3'-0" above finish floor ( but this could be higher or shorter depending on your height) for a standard undermount/drop in sink (2'-10" if ADA) subtract the height of the vessel sink from the 3' dimension. Good luck, Michael
In this case the counter was mounted at 2'-9". Withe faucet, Similarly, check the manufacturers cut sheets for the dimensions of the faucet set. They may have a recommendation for height above the sink. In this case we mounted it 9" above the countertop to centerline of the spout at the wall (6" above the lip of the sink)
Eggleston Farkas Architects
Michael Tauber Architecture
Related Discussions
To ceiling or not to ceiling.... that is the question ??
Q
Kitchen Woodburner Stove ideas
Q
Driveway tiles paving tiles - mixed tiles
Q
kitchen island help
Q
jennloper05
Michael Tauber Architecture
Michael Tauber Architecture