Gas linear fireplace suggestions?
9 years ago
Featured Answer
Sort by:Oldest
Comments (14)
- 9 years ago
Related Discussions
Gas fire help needed!
Comments (3)Hi Donna There are products available to solve this problem - the simplest being basically spray paint to rejuvenate the coals and fire-back. It is heat resistant. http://www.ebay.co.uk/itm/PERCY-DOUGHTY-GAS-BLACK-COAL-SPRAY-PAINT-REJUVENATES-FIRE-COALS-300ml-/161477440833?hash=item2598ce3541:g:Pp8AAOSwBP9UXhgt If the coals are really crumbling it is also possible to get replacement coals, you should try to get the same number and shape as the original. Probably the best idea would be to have the gas fire serviced by a local fireplace shop and ask their advice about how to proceed to be on the safe side....See MoreNeed advice on fireplace without working chimney
Comments (13)Of course. The dimensions would depend on the size of the fireplace/burner you would be going for. The opening would have to be made of non-flammable material, such as brick, stone, metal, porcelain tiles, Vermiculite Board, etc. You could use non-flammable paint over that. For example, our freestanding baskets like the one Richard posted above need 60 cm clearance from the bottom to the top; or if you wanted a contemporary line of fire look you could go for our Regulating Bio Containers like the one in the photo below - all required dimensions are available in the brochure with building advice on our website. We hope that helps :) Good luck with the project!...See Moregas or real fire fireplace?
Comments (1)It depends on two things:- Budget- often chimneys need some maintenance before you can safely use them, you might need to bring in gas, you might need to do some building work. Secondly if want heat or just the flames. You could put in a log burner or living flame fire- both will need the chimney to be safe. Alternatively you could have a flueless gas fire that will give the effect but without heat. You can also get flames from gel burners and electric fires with TV screen type flames....See MoreVictorian gas fire insert...?
Comments (6)There will most likely be a gas pipe running under the floorboards to that gas supply. You need a gas engineer to re route that gas pipe slightly so it terminates at the fireplace itself (not sure why it doesn’t already tbh). Hopefully this can be done via a cellar or crawl space rather than lifting the floor, however if boards do need lifting it probably won’t be many. Then you need something like a Nu Flame gas fire (like a black box which sits in the grate) as mentioned above. Nu Flame is a good brand, not the cheapest out there but good quality I’m told. Again gas engineer needs to install this....See More- 9 years ago
- 9 years ago
- 9 years ago
- 9 years ago
- 9 years agolast modified: 9 years ago
- 9 years ago
- 9 years ago
- 9 years ago
- 9 years agolast modified: 9 years ago
- 9 years ago
- 9 years agolast modified: 9 years ago

Sponsored
More Discussions

Springtime Builders