Hardwood Flooring

4 years ago

Just looking for some help. We had some parquet flooring fitted and within a month it is moving and there are gaps between the wooden fingers.

The installer says that this is normal and acceptable.

I would appreciate any comments and your views on the floor as installed in the photos and also any solutions on how to rectify the issues.

Many thanks for your help.

Sort by:Oldest

Comments (2)

E D
4 years ago
last modified: 4 years ago
Can you also share some photos taken from further away so we can see the floor more in context with your space and get a better idea of dimensions?

Is it reclaimed timber?
PRO
Italian Design Ltd
4 years ago
Professional opinion here. It doesn't look good. Does it look like that everywhere? A bit of movement is ok but if it's like that everywhere then the floor is moving way too much.
Related Discussions
Talk to me about hardwood floors
Q
Comments (6)
I have been a wood flooring professional for over 30 years, so my response might be more detailed than you want! I'll break it down into several issues and you can choose which bits might help you the most. Color: If you have children, a medium stain/wood might serve you better because dark floors show dust and dirt. Wear: A wood that has a stain on it that is much diferent from the wood's own natural color, will show scratches more than a wood with no stain. A matte or semi-gloss finish will show fewer scratches and wear. Composition: What is your subfloor and where are you located? Both these factors will help determine the material to use. Solid- This flooring is made from pieces of wood that are one solid piece from top to bottom. So, if you want oak, the wood is all oak. It can come from the mill already stained and finished (prefinished), or it can be finished at the jobsite after being installed and sanded. Engineered- Engineered hardwood flooring is constructed of two components, a ‘core layer’ on the bottom, topped by the ‘face veneer’. The veneer, or wear layer can be of differing thicknesses. The thicker the wear layer, the more times the product can be sanded. The core layer is constructed of multiple layers of wood which can be of the same or of a different species, glued together in a cross-hatch configuration. This cross graining provides greater dimensional stability, minimizing the expansion and contraction that natural wood exhibits when exposed to varying moisture levels and temperatures. It can come from the mill already stained and finished, or it can be finished at the jobsite after being installed and sanded. If you are going to install one area now and another later, you might want to choose an unfinished product that can be sanded and finished at the jobsite. You also want to ensure that you keep a record of the materials used on the first section so that you can match the second section after the color has changed. They will both end up the same (or at least very similar) color after a few years, but they will both change over time. The other way that you can ensure that they match is to purchase enough prefinished (which has the stain and finish applied at the factory/mill) material for both areas at the same time. For the best match, mix the wood from all the boxes for the first floor, then repackage the rest. Store it in a dry place until you are ready to install it in the other area. Purchase products and hire a professional that are members of the National Wood Flooring Association. They set the standards for and provide education for our trade. They offer certifications in installation and in sand and finish which oprovide homeowners further assurance of skill and competence.
...See More
Restored Floor by Acorn Floor Sanding Bournemouth
Q
Comments (2)
Nice. Shame you arent closer to Wells, Somerset. I have engineered oak that i never sealed 100% properly (fitted 3 years ago) and as such has picked up a few water mark and imperfections... Got some ridiculous quotes to sort it out, for something that should be a straightforward job.
...See More
Kitchen Hardwood Floor restoration Process
Q
Comments (0)
Video showing Sanding and Finishing Process of a Kitchen Floor being Restored to it's former Glory by using the Latest Dustfree Technology and the new Orbital Sander that can sand in any direction also excellent for Parquet and Engineered floors. Acorn Floor Sanding Bournemouth
...See More
How to Keep Hardwood Floors Warm in the Winter
Q
Comments (0)
Solutions to how to keep hardwood floors warm in the winter include: Place rugs in problem spots Add insulating weather strips to doors and windows Ceiling fans can help to reduce cold spots by circulating air Redirect air flow by replacing air vent covers with multidirectional grills Replace your curtains with triple layered interlined heavy blackout curtains Limit access to the room from entrances that open directly to the home exterior Let’s start from the beginning. We must consider the construction of the home (solid vs suspended flooring) and the type of insulation being used (e.g. foam board, fibreglass). Next we must consider the hardwood itself (e.g. Oak, Maple, Mahogany) and how to eliminate draughts and damp. Solid vs Suspended Flooring Solid floors consist of a concrete base topped with insulation and fibreboard. Suspended flooring places parallel rows of brick supports between the concrete base and the fibreboard layer. The difference between solid and suspended flooring is best illustrated as a small insulative gap vs a large insulative gap respectively. This significantly affects heat retention. While a correctly insulated solid floor will help a room to heat up relatively quickly, the wood floor will rapidly cool once the heat source is removed (as compared to the time taken for a hardwood floor to cool atop a correctly insulated suspended floor). Let’s take a look at how this affects the overall lifetime efficiency of solid flooring compared to suspended flooring: Solid flooring: 8-10 year cost effective period on heating costs Suspended flooring: 3-5 year cost effective period on heating costs A note on insulation: Phenolic foam is often used to insulate solid floor constructions because of its relative insulation efficiency – the thin synthetic material is used in conjunction with wood fibreboard to achieve a high performance while minimising the additional floor height. This material is also commonly used with suspended flooring, where wool or fibreglass is used between the joists. Hardwood vs Softwood – Choosing a Wood Floor Hardwoods have a high comparative density compared to softwoods. This higher thermal mass means that hardwood floors absorb, retain, and release heat over a longer period. Hardwood floors with a high thermal mass include Oak, Maple, and Walnut. Where possible, opt for solid wood floors (five eighths to three quarters of an inch thick) over engineered floors (a wood veneer glued to plywood). This will increase the cost effective longevity of the floor in terms of the number of times the floor can be sanded. How to Keep Hardwood Floors Warm Once we have considered the construction of the house (solid floor vs suspended floor), and we have selected the correct underlay, fibreboard, and hardwood floor to fit with both the house construction and your style preference, we move on to isolating and removing potential causes of draughts and damp (see list at top of page for pro tips). Remember, hardwood floors will retain heat for much longer than a softwood or carpeted floor. Smart use of sunlight could also help to keep hardwood floors warm in winter. Open your curtains during daylight hours to allow the wood to absorb heat from the sun. Be sure to close the curtains once the peak temperature of the day has passed.
...See More

Hardwood Flooring

Comments (2)

E D

Italian Design Ltd

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US