Personally I wouldn't go with a yellow splash back. Not because it wouldn't go but more that you already have enough of that accent colour around the room, over do it and it can look forced. There is a fine line between getting the balance right were it looks classy and going over board to the point it looks naff. Personally I would either go for a splash back that is colour matched to the walls or a smoked mirror. You are limited in some ways because it appears there wasn't any forward planning with regards to splash backs. Any splash backs would need to be confined to the width of the extractor because your curved wall units won't open otherwise. They would have to be packed off the wall if you wanted to go full width splash back. I would recommend a durable matt paint in the kitchen. Good quality ones will withstand washing without polishing up and showing tell tell marks where they've been washed. Little Greenes Intelligent Matt is perfect for this and is our choice of paint when not using any further splash backs above the granite upstands. I understand a colour matched glass splash back or smoked mirror may seem like the safe option and boring to some, but there is no point in being brave just for the sake of it. You've got plenty of other points of interest in the room with regards to colour without having to push it too far. Let the kitchen itself be a subtle canvas to show off other items rather than fight with them for attention would be my advice.

Hi Lee, No problem : ) With the LED tape, it depends upon how happy you are with soldering : / The tape can be cut at set marked places. It is then possible to solder wires on at these points and then extend the tape. Personally, in your case, I wouldn't cut the tape yet but wait until the integrated dishwasher arrives. Depending upon the model of the dishwasher, it may be possible to fit the aluminium extrusion to the underside of the units and run it past the dishwasher without the door catching. If this isn't possible, you may need to cut the tape and use a joint to fit the extrusion to the plinth under the dishwasher. If you use a slightly deeper extrusion, you can mount the extrusion onto the plinth under the dishwasher by putting the double sided tape onto the side of the extrusion. I think that I probably need to do you a drawing of this to show you what I mean! Do you know which model of integrated dishwasher you're going to fit? Can you remind me where in the country you're based? With the projectors, I've heard of Benq but haven't seen either of the models in the flesh. Are you going to be using a screen with them or just beaming onto a wall? With a screen, the brightness of the projector isn't as important as the screens have a higher 'gain' than a white painted wall - meaning more of the light is reflected back to you. You will also need some way of blackening the room out as this will improve the image quite a bit. We have a projector at home after getting rid of the TV. We found that it totally changed our viewing and gaming habits. The lounge is now dark purple (with the white room we had before, the reflections off the side walls were quite noticeable) and we have thick curtains over the window. You won't regret gaming on a projector : ) We use ours mainly for Skyrim : ) Projectors don't hold their value very well, (we bought ours used), but there should still be bargains to be had with new ones. If you can't get to see one in the flesh, then try to find one that's reviewed well and buy from a shop that will either let you demo the unit or has a good returns policy. We have a JVC X-7 which we are very pleased with. For a surround sound system, do you want the speakers too or just the processor? It may be easier to go through this on the phone. My numbers on my profile : ) Thanks Peter

Behind your range i'd use a stainless steel sheet, Ebay's cheap, but just google stainless steel sheet, available cut to size all over the place. This one for instance is quite a size 2000mmx1000mm Ebay ( Stainless Sheet ). You can then use the car paint and the metal will take the heat as will the paint. Or to go with your colour scheme how about Copper?? copper sheet ( Ebay ) Plain Or, take a blow torch to it for patina??Copper patina sheet glass available from a trader on Houzz [Glass Splashback[(https://www.houzz.co.uk/products/copper-patina-glass-splashback-60x60-cm-prvw-vr~87224336)

Saw an article on Apartment Therapy talking about mirrored splashbacks recently. Had some lovely photos featured, I personally preferred the options where the glass is raised up from the hob slightly. Could you maybe get a piece of the upstand cut to fill the gap? Also having it 'framed' by wall either side looks better to me than it spanning the whole space. I've mocked it up to extractor fan level and to ceiling level (I've guesstimated the tile scale but hope it gives you the idea). Personally I prefer the latter in this space as the proportions look better. http://www.apartmenttherapy.com/mirror-backsplash-ideas-that-arent-from-the-70s-or-80s-248551