Hi caroljchapman49 Our Brooklyn 3 Light Pendant Bar - Satin Chrome could be a great choice, the diameter of a single shade is 20,5 cm and the overall length of the fitting is 80 cm. The height can be adjusted to suit your needs. Hope this helps and if you have any questions feel free to contact us by emailing customerservice@litecraft.co.uk or by calling 0161 359 4777 Kind Regards, Litecraft Team

I think that you need to leave a wider gap, 30cm is not wide and I think it will look like what it is, ie stopping the units so they don't get in the way of the french doors. I would go with a 60-80cm gap and make a useful feature out of it with floor to ceiling shelving. I've found a picture showing some shelving stepped back from regular depth units, so you get an idea. Another option is to use a rounded base unit if you like them and maybe put a stool or plant in the gap.

I think you can transform this kitchen on a low budget to tide you over for the next couple of years. I would do the following: Try painting a sample tile to see if it will properly accept paint. If so, I'd paint them a very pale cream to make them disappear, and remove the large section of tiling altogether near the door. Wipeable paint should be sufficient here. I wouldn't change the door handles - your ideas for bringing in a few industrial styled items will work quite well even if you keep these. Industrial style bar stools (black metal and wood) + black metal industrial style lighting will have great impact on the room and tie in with the cupboard handles and radiator you already have. Photo wall on the end wall behind the breakfast area is a nice idea - just be careful how you place the frames so they don't conflict visually with the lighting you choose when you are standing at the other end of the kitchen. You could actually do this photo wall over your nice charcoal coloured radiator instead to avoid visual clashes with the light fitting. I would go for a group of photos all in the same frame finish to keep it coherent - just modern slim black frames to link with the metal on lights and bar stools. Windows - if you are not overlooked I'd leave them without blinds. It is more in keeping with the pared back industrial style you are leaning towards. Are you happy with the colour of your walls? It might just be the photo but it looks a little on the dark side - and I'm not sure grey really sits with cream very well? You could paint the walls a lighter colour - maybe something similar or the same as the tile colour you choose which will make those tiles disappear even further. Perhaps there is a tendency for many of us to try to include grey with existing schemes because it is strongly in fashion when in fact it needs careful planning to avoid it either clashing or looking too cold. (just what I've observed from experience)! If you are planning on revamping the whole kitchen in a couple of years I think doing these small changes will satisfy you as to the existing with very little outlay. If the things you choose to buy now are going to be used in the new kitchen too you won't feel as though you've wasted too much time and money now. Hope some of these ideas might perhaps be useful- I don't profess to be a professional but I really enjoy interiors and making things work!

It’s the edge of the carcase you can see. Most carcases are edged with a 2mm edging which is put on by machine. Some older ones have iron on edging applied. If you want to replace it then it’s a fiddly job. The way to get it off is to heat it up so hold an iron with no steam setting and peel it off. Then you have to apply the new one which can be iron on and file off the edges. The machine edged edging at 2mm would have to be done on the machine and it’s done when it is in pieces not fully assembled.