Here’s an example of how to use the method above. All measurements taken are using the device’s own internal light source which is called D65. So straight away you are comparing colours from the same starting point. Using the device, I took measurements of Maggie’s stunning marble work surface. To the naked eye, it appeared a white slab with light grey & dark grey veining. However when measured, the white majority of the slab belonged to the yellow Hue Family & the darkest veins sat in the Yellow-Red Hue Family. Taking further sample measurements of the stone slab flooring, confirmed they too sat in the Yellow Hue Family. So to tie both flooring and work surface together with colour for the island & kitchen units, it made sense to begin looking for colours within the same Hue Family. Getting a Hue Angle reading gives a spot to plot it on the Wheel. The info also gives other key attributes for each colour, making comparison much simpler. Maggie knew she wanted a dark colour for the island, a mid tone for the cupboards & something lighter again for the walls. It’s a new mode of working for most of us home owners, but it’s actually just working with the information companies use to make the colours in the first place. And so it’s a much more objective starting point to finding the right colour for the job. I wish you lots of luck on your quest!

This is a helpful podcast if you are thinking about what size of kitchen island you want or what to go for: https://shows.acast.com/love-your-kitchen/episodes/exploring-function-over-aesthetics-with-amnda-hughes

Love your kitchen, you’ve done a great job, not only does the kitchen look good, it’s totally practical, drawers are the way forward, even if they are more expensive than cupboards. I’ve just redone a kitchen in a house we rent out, the old one was finally falling apart. I was going to go to Howdens and use the joiner etc we knew, but in the end we used a small local company, which cost us £300 more, but the quality of their interior cabinets and doors was so outstanding, plus they could do everything, including tiling, we went with them. We didn’t change the floor, but did everything necessary, I’m hoping it lasts well and our tenants look after it!

With pine green cabinets and white worktops, there are several colours for the kitchen floor and wall that would complement the colour scheme nicely. Here are some ideas: Neutral colours: Since pine green and white are both strong colors, you may want to consider using neutral shades for your walls and flooring. Colors like beige, cream, or light grey can work well to balance out the stronger colors in the room. Lighter shades of green: Another option is to use lighter shades of green for your walls or flooring to create a cohesive look. A pale sage or mint green could be a good choice, as they complement pine green nicely without overpowering it. Warm colours: If you want to add some warmth to the room, consider using warm colors like terra cotta, mustard yellow, or burnt orange. These colors can add some depth to the room and complement the pine green nicely. Cool colours: On the other hand,cool colours like navy blue, teal, or slate gray can create a calming atmosphere and complement the pine green as well. Ultimately, the choice of color will depend on your personal style and preference. It may be helpful to gather some samples and experiment with different combinations to find the perfect look for your pine green and white kitchen