Hello donned2004, Well you could remove all the things from the hearth.. So it has more space.. Hang the mirror and paint the chimney breast a nice colour to bring the fireplace into full focus.. If you wanted to have an even bigger recess.. you could open the fire out up to the sides of the wooden surround.. So taking out the 30's tiles.. Make sure the lintel is in place or doesn't need replacing and keep the surround it's rather nice.. Remove the current tiled hearth if you chose to open it out more.. and install a flat piece of slate.. So then you would have an open brick recess and a lovely iron basket could sit nicely inside for logs! Another idea to continue into the room.. might be to look at painting the woodwork a colour to compliment any wall colours you have.... Some lovely painted floorboards, or parquet or a natural Jute or Coir flooring if you have not already decided upon something.. : ))

I feel like I'm making loads of decision but still not really getting anywhere. There is so much to think about! Spotted some lovely toggle light switches so I've already bought them. I know where the light switches are going but its a case of figuring out the best places to put the plug sockets because we have so many in my mums house but we still run out! We've opted for a few USB sockets too so at least if we are charging phones and laptops, we are freeing space for other things too. In terms of kitchen layout, the suggestion of the seating in the bay window is great but because that would mean the kitchen would have to go at the other end, we've decided against this. It would work, and would probably be the best option once the horrible extension is knocked down but at the moment, the extension blocks all the sun light on that side so the kitchen would be very dim and dark for a while. The extension is something we are saving for and is more likely to be done in 4-5 years time so I'm not sure it makes sense to be in a dark corner for that length of time. We've had the house a month tomorrow and so far it has been ripping the house apart. January is the month we put everything back! Super excited. Plumber, heating engineer and builders are all put to the task in January. New floor in the kitchen, wall removed and built up again to accommodate the new window so that we can have units underneath, first fix plumbing, first fix heating and boiler installation. All other windows to be installed. Hoping that guttering and chimneys can be looked at too! We have a chimney breast on almost every wall which I'm sure was great for heating years ago but as they are no longer used, they cause so many damp issues! I bought paint tester pots today - I have no idea why, we are nowhere near ready for that but it just felt nice to buy something pretty and cosmetic rather than look at insulation and damp proofing. P.S; any suggestions on obscure glass for the bathroom and hallway? I've been given a huge list of options but unsure as to what to choose. Thinking just Contora or Arctic?

@Jaya Garella I wasn't 100% sure what you meant by 'the bras'? haha. none of the tiles on the mock up pic are anything I have specifically chosen - they are the least offensive on the app I had which is a house mock up program and not specifically for bathrooms. I would need a splashback with a sink unit though as that back sink/wc wall is just a wood frame at the moment so will need plasterboarding. Part of me wants to avoid the grey as although I love a rich grey, the rest of my house is off black by F&B so very dark and moody. In the tiles in a small room it might be a bit drab? I'm also struggling to find patterned tiles that I could put all over the bath wall and bath that wouldn't be too much ie too large a pattern or too small. I would then have to have maybe a wood effect (vinyl or tile) on the floor as I think pattern on the floor and bath panel and large wall might be too much? You don't see the bath wall when you walk in as the door opens to the left and hides it. Trying to find some industrial glam images of alternative options as I'm a bit stuck in a rut with it and my bathroom fitting team is a bit old school so not up on design! haha

I think you'll have to remove the bath side panel and get to the seal thats on the overflow (pic 8 with the adjustable) and put some silicon on the seal so it seals the overflow to the back of the bath. Looking at the pic it does look like there's old silicon there which really could do with cleaning off. You can add more silicon to the seal on pic a or get a new seal, then whilst holding the overflow in position at the back of the bath in position you fix the front parts via the screw into the overflow.