warped internal door

7 years ago

I have an internal door that is warped. It’s always been warped since I moved in and it is now time to do something about it. Someone told me you have to leave them flat outside in the rain to self correct- is that true?- it seems unlikely and I will be likely having to replace it.

Featured Answer

rachelmidlands

7 years ago

Hi Jonathan, interesting question. I think your friend may be right. To bend it back into shape the wood would require moisture and pressure. So with that in mind I might try and expose the wood by either stripping the paint or at least sanding affected areas then leave outside with sandbags on top of the warp or clamped to a hard flat surface. I’d expect at least a week before you see any movement. Then there is the trouble of it just warping again when you bring it inside to warm dry temperatures so you need to keep the weights or clamps on inside while the wood adjusts to room temperature. If (...big if) that all works then then re seal with paint or varnish. In our house it’s the opposite away around as the doors are fine..it’s the house that’s warped...or “historic movement” so the surveyor said:-)

Sort by:Oldest

Comments (12)

Chris Goodchild
7 years ago
I suspect the door was either made from poorly seasoned timber or, more likely, was left outside, got wet and was then brought inside and dried quickly. I doubt anything you do will remove the warp it would be better to replace it
Related Discussions
Looking for ideas for replacement front door, now an internal door
Q
Comments (8)
Thanks for all comments. I like PWJ architects idea, but think our space would not do that door justice. I love the bi-fold acoustic fabric panel and will investigate that further. I do want to replace the door with something as an add on porch, no matter how well insulated, will always allow a cold or hot bank of air coming into the hall.
...See More
Should I keep original internal doors?
Q
Comments (61)
Sorry I haven't read the comments (too many) but if you are considering keeping them, I'd send them off and get them dipped. If they come back in one piece then go from there. It may be they come back with a lot of damage, some panels may need to come out - but you can always update with fluted glass panels etc. If they come back and were full of filler etc and bad condition then sand, fill, sand again and paint a dark shade. You can make them look beautiful if you want to. It may be they come back in good condition! In which case you can stain and keep natural. I'd probably replace all the hardware though.
...See More
victorian doors look nice but are warped and let sound in, replace?
Q
Comments (2)
No idea how it would impact the value of the house, maybe an estate agent can advise on that, but if you’re letting rooms out I think you need to change the doors. If someone is paying for a room they should be certain of privacy, and fire safety. Angie
...See More
What are the best internal doors in a Victorian house?
Q
Comments (10)
Unless your budget can stretch to top end solid wood doors, I’d probably opt for white. That said, the quality of original wooden doors is often high and while they might need a little reshaping by a competent carpenter and some TLC, if I could renovate the existing, vintage doors and get them back to fine fettle, that would be my choice - and a better use of scarce resources. The general quality of timber from that era was much better - slower growing, tighter grain. The majority of timber used these days is fast growing, forced forest and is rarely of such good quality or longevity. Will be interested to hear what you opt for!
...See More
PRO
Priors Period Ironmongery
7 years ago
Hello Jonathan, we sold doors some while back and once the wood is warped that's it! Nothing you can do to reverse it. The warping is caused by moisture as outlined by Chris. You could put up with it or find a new door from a reclamation yard. If you need any new door knobs we can help. Traditional door knobs Good luck!
E D
7 years ago
Yes, I think Priors is right, no way to straighten it. Re-hanging the door can sometimes help a little but might not be worth the trouble.
I do like your door though.
You could try and find a reclaimed door to replace.
Jonathan
Original Author
7 years ago
I agree- I am going to find a replacement
PRO
Priors Period Ironmongery
7 years ago
Good idea! If it is close to a standard size 1980 x 760mm, these are harder to find. Try Salvo website for a list of reclamation places in your area.
PRO
Lifestyle Kitchens
7 years ago
Might be a stupid question but have you checked its actually the door is out and not the wall/frame or a combination of both
Jonathan
Original Author
7 years ago
Thanks for asking- its definitely the door
PRO
Lifestyle Kitchens
7 years ago
could it be turned round and re hung as it does look a nice door and in keeping with the architrave
Jonathan
Original Author
7 years ago
Good suggestion but I am now of the opinion that it can’t be salvaged and so when I see a replacement the right size I will get it.
Sam Potter
7 years ago
Or you do a total bodge job... Yeah I'm going to take it off and try it back to front. I did find it in the back lane on the first place so nothing to lose.
Sam Potter
7 years ago
*could do

warped internal door

rachelmidlands

Comments (12)

Chris Goodchild

Related Discussions

Priors Period Ironmongery

E D

Jonathan
Original Author

Priors Period Ironmongery

Lifestyle Kitchens

Jonathan
Original Author

Lifestyle Kitchens

Jonathan
Original Author

Sam Potter

Sam Potter

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

warped internal door

Comments (12)

Related Discussions

JonathanOriginal Author

JonathanOriginal Author

JonathanOriginal Author

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Jonathan
Original Author

Jonathan
Original Author

Jonathan
Original Author