@minipie I could put the fridge freezer on the main run of the kitchen, but that would then reduce the work surface on that wall - and the work surface is sure to be small as it is. If I turn the island 90 degrees to be parallel to dining table then it would mean that neither the hob/oven/fridge/sink would be behind me. I would have to walk from the island across to the main run for everything...... not sure how practical that could be. And if I did do that then, I would have a nice view while working at the island but anyone sitting on stools would be looking at the staircase, which wouldnt be right. @Heather - the space is already 5 x 6 m almost - I dont think we need to add an extension. That should be enough space for a decent kitchen with dining table. I dont need any extra living space either as we do have 2 large lounges. Keep the suggestions coming, thanks!

Miriam Do you actually mean columns as in structural elements or do you mean decorative pilasters? The size of a column is dependant on the load it is carrying and if these are load bearing elements. I would consult an architect and an engineer. There are standard sizes but the choice is driven by the structural requirements. If they are pilasters. Then a starting point would be to talk to suppliers of the plaster replica's https://www.lassco.co.uk/a-pair-of-english-cast-plaster-pilasters or others. They should be able to give you some guidance on the choice and size modules. Hope this helps Best David

​I have a 1400 x 800 shower, was going for walk in but bathroom fitter advised against it. We have a sliding door, easy clean, expensive one. I am glad i didn't go for the walk in because honestly 1400 is too small. Why not go for 1600 with a walk in, or 1400 with sliding door. By the way the small gap can he easily sorted by your tilers. They'll make recommendations when they come n to quote. Such a common problem for them to solve. I'll try to attach a pic of my showerso hopefully you'll see that 1400 ight be too small for a walk in.

It depends on a lot, like the shape of the room, the access points and dimensions around the room and so on. If you imagine that the ideal depth would be a minimum of 500mm (up to 600mm) for hanging space in open units - depending on what you are hanging or shelving. And you would want around 1m for dressing and access - it should give you a good idea. Here is a plan view which may help you. fingers crossed. This is what I would be looking for ideally in terms of dimensions for that layout. I hope it helps, regarding, Gina