I can only speak from experience of tiles and Karndean. We have two dogs, live in the country, we and the dogs are in and out all day. The dogs both used to slip even on terracotta ( back in the old days), and, i'd be worried about shiny tiles, especially with larger dogs that could slip far more easily and cause themselves damage. The tiles were dark and had to go, as they showed up the dirt. The grout was the biggest problem, as it was easily stained, and just not practical with dogs. We swapped to Karndean around 5/6 years ago and haven't looked back since. It's simply the best, unscratchable, hard wearing, versatile, easily cleaned surface ever. We live in an old cottage and it had to fit in, so we went with Van Gogh, a floorboard effect look, complete with etched woodworm holes! Love it.

Hello Charlotte, Having just had a look at the picture and layout of your backyard, I would have a couple of suggestions which may be useful to you; I am not a landscaper, but as I have just completely re-vamped my own garden, I have learned a few lessons along the line ;). First of all, think twice before you remove the raised beds/borders, as they are in the right position to provide screening for your yard and it's much better to have larger plants sitting in the actual ground, as they'll thrive and require much less watering than those in planters; also, the beds look nicely part of the existing structure, so I'd probably rather try to incorporate them into th scheme, or maybe remove just a part. You could try to incorporate some of your desired seating into, or rather onto, the beds, by building (or buying) some simple seats out of decking planks o.s., therefore saving space whilst still keeping the precious(!) soil. In terms of ground cover, I think the gravel is a great idea and it will look and feel soo much better than the existing concrete! Another thing that came to mind is that you could section the floor space a little by building some raised decking where you want the seating area to be (I imagined it on the left hand side of the picture along the raised beds, but in an irregular shape to make it interesting and more natural). This will create different "zones" and will, strangely enough, make the space feel larger. It's difficult to describe all this adequately, but if you are interested in the idea I could do you a quick drawing or mockup for further explanation :) Plant wise, I would recommend to go for those varieties that do not need full sun - I can very well imagine large ferns and wild flowers, maybe some bamboo, palm trees, or hedge plants for screening. I did quite a bit of research on the RHS website for my garden; it gives you the option to look for varieties suited to your soil type and climate, which I, as a novice gardener, found very useful! Hope this helps a bit; I tried to keep it short, so feel free to get in touch should you have questions :) Best Regards, Stephanie

As others have stated above, the gas hob arrangement just isn't safe and it needs to be ideally 300mm from the edge. That would be the first thing i'd resolve before worrying about new hobs. I think you're looking at a new worktop for the island then depending on the base units and any built under appliances you could then have a new hob safely fitted. Most hobs upto 750 wide have a 560*490 cutout, 800 and above need a bigger cut out. The other issue you may have with a large gas hob is the gas supply pipe could be undersized for the new hob and your gas man might refuse to connect it. Induction hobs are brilliant but you do need suitable pans to use (and no one with a pacemaker). If you're worried about loosing the gas you could go with domino hobs, basically these are 300 wide hobs which have joining strips so you can make your own hob design and combine different cooking methods, not the cheapest hobs but could be more functional for you.

Can anyone recommend a good matt varnish for original victorian pine floorboards? We used bona mega matt last time, but we need to re-sand as our dogs have completely scratched the floors. I know with the dogs we are going to get scratches, but we perhaps need a more industrial strength product this time to try and avoid damage as much as possible. Any recommendations?