Vanity
6 years ago
Featured Answer
Sort by:Oldest
Comments (32)
- 6 years ago
Related Discussions
Vanity mirror height
Comments (12)Hi there, yes, a bit of an issue. Was a height specified on a design somewhere, or has the fitter arbitrarily decided on the height? We would normally leave this as an "on site" decision for the fitter to consult the client and agree a height prior to creating/modifying boxing & structure to suit. That should have happened quite early in the build in the case of recessed cabinets. As Sarah correctly indicates, there is no "standard" height and normally there is quite a bit of flexibility, unless you have runs of furniture which include tall units which may set an "upper edge" limit. You don't have this, so now you have a dilemma. While there is no absolute way to determine a "correct" height, as a rough rule of thumb we would get the tallest & shortest adult using the bathroom and measure "floor to eye" height of both, then pick the midpoint between these two heights as the rough centreline for the mirror, then tweak to taste. My gut says yours is slightly higher than optimal, especially given room height. As to what to do - reworking it now is a not insignificant undertaking, as you would need to remove a couple of rows of tiles (to one tile each side of the opening), recut the board, possibly add in some additional noggins, possibly tweak the electrics (if it has been left with insufficient float), then recut and retile the "awkward" bit. Any fitter is going to strenuously resist doing that at this late stage! If he is accurate to drawing, then it would be reasonable for them to expect you to pay for the privilege of such a change. If the design shows the mirror lower, you have a case to tell them to put it right. But expect resistance! If there is no design and you have not been clear that you wish to be involved in setting the height, then you're into a grey "he says, she says" situation, and have to decide how far you want to try and push it. Best of luck!...See MoreBathroom Wall Hung Vanity
Comments (10)Like this, but 1m wide! https://www.lussostone.com/vanity-units-c11/volini-vanity-unit-with-stone-basin-polished-cappuccino-800mm-p3482/s4824?utm_source=google&utm_medium=cpc&utm_term=volini-vanity-unit-with-stone-basin-polished-cappuccino-800mm-vol800pc-729800&utm_campaign=product+listing+ads&cid=GBP&glCurrency=GBP&glCountry=GB&gclid=EAIaIQobChMIrYWNtuPw_gIVdoCDBx1YZAC8EAQYASABEgJSLPD_BwE...See MoreWhat colour vanity unit: brown or white
Comments (4)Are you removing the current basin? You have spent all the money on a bottle trap to be exposed and if it was going in a vanity you could have just had standard white pvc fittings....See MoreVanity unit colour for navy cloakroom
Comments (8)Obviously a wall hung unit would show more of the floor so would give the illusion of more space but a floor standing unit would conceal the boxed in pipes, the sink pipes and would give you more storage. A bathroom fitter would be able to fit the unit neatly up against the box. But you would need to choose a unit that can be modified easily....See More- 6 years ago
- 6 years agolast modified: 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 5 years ago
- 4 years agolast modified: 4 years ago
- 4 years ago
- 4 years ago
- 3 years ago
- 2 years ago


eljayemc