Any corrections
6 years ago
Featured Answer
Sort by:Oldest
Comments (7)
- 6 years ago
Related Discussions
Previous post correction - garden limestone
Comments (4)The stone could be honed by a specialist company. This involves finely grinding down the top of the tiles with a machine. I'd seek their advice on this. Depending upon how deep the acid has etched into the tiles, it may be easier to retile...See MoreTell us: Do you have any home renovation regrets?
Comments (32)Whilst I recognise there's a few tradespeople on here bemoaning fussy clients I have to say my biggest regrets when renovating my house was not being specific enough with trades! We had an electrician put in an extra light switch in the hall to control both the downstairs and upstairs lighting. He put it in a good 10-15cm lower than the other switch further along the same wall which looked completely ridiculous. Made him move it in line with the other one much to his annoyance. Another similar incident was with a vertical column rad for the kitchen - whilst I was specific enough this time to ask it be centered to the wall it was on, he installed it much higher than needed with about 30cm of pipe sticking out the bottom! It would have looked much better in line with the doorframe adjacent. Had to learn to live with that one. We had engineered wood floors put in upstairs - the fitter used the shortest wall in the smallest room to take a plumbline from. When it came into the hall it was obviously on a complete wonk. By this point I'd gotten a bit better at speaking up and ensuring we actually got what was needed (and paid for!). He had to take it up and re-lay using the hall as the plumbline. Looked so much better but he was extremely annoyed! After all this I learned to use masking tape to direct exactly where pipes/light switches/trim should be fitted so there was no room for 'interpretation'. I also forced myself to speak up more and advocate for what I really wanted. That said I'm a designer by trade so I generally know what I want and how to make it look good but was definitely a bit too shy to contradict trades in the beginning!...See MoreSmall bathroom renovation...do we have the correct design!?
Comments (15)I have my washing machine in a cupboard in my bathroom and in your new proposed plan I don’t think you’ll potentially have enough space to comfortably load the washing machine front on without banging yourself on the sink. The original position of the cupboard I think is better (I have mine in a similar position in relation to bathroom door etc) also which way is your washing machine door hinged? If it’s hinged on the left like mine you’ll have even less room to load in the new proposed position. Try to hinge the cupboard door the same side as the washing machine too. Jonathan’s plan looks like a good plan to me and I’d have proposed similar :)...See Moreperhaps not the correct area...
Comments (5)The property isn't a new build, the original part of the property is 1930s, and then it has had a couple of extensions and then changed from flat to pitched roof. The house isn't a new build The property will be as surveyed, as the trusses have been cut to allow full head height above the garage(attached to the house), and was advertised as accomodation above the garage space Then the poorly built part is above the main house where my builder who was round looking at something else has pointed out the deflection he can see in the rafters where he said they should be doubled up and have webs installed (some are there but incorrectly placed and/or build onto non solid structure - onto the felt roof and not onto the joists themself) Really starting to make me feel I've paid a lot of money for a property that isn't worth what I've paid and requires a lot to be spent on it......See More- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago
- 6 years ago




Jonathan