oh that's great news! We bought the proper knife to cut it with, when wallpaper scissors, stanley knives and scalpels didn't work, it was less than £10 but it made all the difference, saved time, frustration and bad language. :))) http://www.gowallpaper.co.uk/ofla-heavy-duty-x-design-auto-snap-knife-18mm.html best of luck ps the thermal liner can dent, so don't let the decorator lean heavy tools against it :))

Firstly check where dump comes from. No point in replacing the floorboards if then there is too much moisture. Replace all damaged floorboards and make sure joists are sound and stable. Then you can add a damp proof membrane over the pine floorboards. Then you can add the underlay and the floating hardwood flooring on top. Solid wood flooring is the worst option in areas where there is moisture. We strongly recommend quality engineered flooring instead. This is a rather complex job if done properly. The installation of the damp proof membrane is crucial obviously and to do a good job you should remove the skirting boards. damp proof membranes are available from may retailers https://www.screwfix.com/p/capital-valley-plastics-ltd-damp-proof-membrane-black-1000ga-4-x-25m/88322 and all have more or less the same specs. The DPM is indeed required to damp proof anything above the structural floor. There is nothing you can do on the structural pine board other than making sure there is no water leakage and there is good ventilation. hope this helps

Hi Zi, Without a survey it is difficult to say if the paint would work for you in the same way as your neighbour. It may be that she has extra block work inside that acts as a barrier to any leaks which your side may not have. I understand why you would want to go for the more cost effective option, but best to get a damp survey to be sure and save paying for works that may fail in the short term. Tara Taylor Project Manager Essex and London Construction, Basements, Extensions and Loft Conversions Limited tara.taylor@essexandlondonconstruction.com www.essexandlondonconstruction.com

jenny, looking at your photo it may be that your floor level internally is below the external floor level. the door to the side of your first picture seems to indicate this being the case. if I am right then there could be a number of reasons that you have damp internally. if you can share some photos of the outside and the internal area of the affected area I may be able to give you a better steer on what's happening. Best Rowland