You're welcome! This is an exciting project and I really hope you'll share the results, whatever you decide to do! I think metro tiles are the right way to go. You've already got pattern and bold colour covered so something more simple is probably right for the walls. Besides, it's a classic design. You could do it with a dark grout if you wanted to make a bolder statement. [This Houzz story[(https://www.houzz.co.uk/magazine/decorating-10-different-ways-to-use-classic-metro-tiles-stsetivw-vs~25104664) about metro tiles shows them mostly with dark grout and might help you visualise it. Marble would definitely work and look incredible. Just be careful to bear in mind the structure of the unit and how much weight it can hold. You have to consider the weight of the surface material, the sink, and the water it would have in it when full. Maybe even think about what you're going to fill the cupboards with and how heavy that could be. Perhaps it would be worth reinforcing the vanity in some way. Other than marble you could use tiles or just varnish the surface really well. All of these options will look great in different ways. Even though you're not DIY-ing it, take a look at this "how-to" to give you a better idea of the process. Also check out these Houzz photos of other homes with dresser vanities to give you more inspiration!

Hi rosiescruff! If you do some research into hydrotherapy baths and the kinds of prices they go for, you could try selling it on eBay with the delivery option as "collect in person"? Or ask around and perhaps someone you know would be interested?

Rather than use a local joiner, you could try bathpanelstore.co.uk, which makes custom panels for very reasonable prices (and where I turned when I needed a new one.) A plain single piece MDf one is about £70, and marine ply ones are £106. Making them two piece / with a plinth adds about £15 to the price. You can send them a drawing of what you want and they will make it. So given you can’t accommodate drop down hinged doors, how about pop/ lift out doors? They can be secured using roller catches or magnets. Depending upon size and placement, you could probably figure out a way to maximise access to the side of your bath that has the tower cupboard next to it. If if were mine, and I was feeling a bit handy and creative, I’d order an unfinished marine ply with two concentric rectangular cut outs for each desired door... the larger cut out would be the lift out frame, and the smaller one would the centre door panel. Then I would get all pieces shipped to me (they will all fit together like a puzzle.) I would then stain them to coordinate with my bathroom, making sure to read up on how to prep ply for staining. I’d then fit the fixed frame panel, shave a small tolerance off the lift out frame, and fit magnets or roller catches so it can be easily removed for access. And finally, fill the centre opening with either the original panel (whole or cut into slats), or perhaps wired bamboo/willow/reeds edging from a garden supply store. Poundland has them right now, too. Or get the thin fretwork panels used as radiator inserts. Or heck, even a bunch of thin shell necklaces like a Moana-inspired fringed curtain. Thanks for letting me live vicariously

Hi Gabby. Ah it’s a shame you’ve got no way of cutting it. Something like this would be awesome:) (see pic). Are the baths made from the acrylic plastic stuff or metal, if metal then a scrap metal merchant might take them. I use Shpock and gumtree a lot for getting rid of stuff, advertise stuff as FREE and there’s nearly always someone who’ll take it. However I like the raised beds idea, clad with timber and it shouldn’t look too bad, I’d put some gravel in the bottom tho to aid with drainage. Might be more work than you think tho so I think I’d try and get rid first.