TRADESMEN. It's a miracle when one bothers to quote at all ... as such, I now build walls, can plaster, and drive a digger lol... I tile, fit carpets, fitted the kitchen, all with only half of one of my lower spinal discs left. By the time you get a quote back, its more often a month or more down the line and have already hired a couple of lads on a daily rate doing things how you dictate after weeks of research. I hired a roofer to replace my cast iron guttering with aluminium ones, he put up new soffits and fascias BADLY, ran off to assume weigh in my old gutters and ran off with the money for my new ones - steep learning curve there, and a CCJ is no use getting my money back. I purchased a kitchen, it turned up in bad shape, then commenced over 8 months to get to court for my money back... Hired a tree co to remove a load of trees overhanging the house and clear the boundary... an old man cried about a tree that wasnt his anyway so the tree folk abandoned the job. Thankfully I have a great electrician and a reliable plumbing company, but only call them for either gas or. heavier electrical work.... the husband does to electrics and plumbing but he hates it and we do get it checked. I keep trying to find a good builder though. Everything takes so long and its physically and mentally draining on me.... I would MUCH rather have someone I can trust but no luck yet.

Hi Lauren! I worked on a project with a similar situation! The windows were in a spare bedroom, so ideally they really did need to be covered at night time, however only when people were staying over. We had venetian blinds made for the standard rectangular window, then for the 2 angled windows, we produced a 'shield'. Basically, we got our joiner to make two shields which were templated to the same shape as the window reveals, with a handle in the centre, which then hooked on to the window. So they could be taken up and down as you wish. They were produced in oak and finished the same colour as the rest of the joinery and blinds, with a handle in pewter to match the rest of the ironmongery in the house. Unfortunately I don't have ay photos of the shields, but you can see the window, and the hooks that the shield mounts on to! We found this to be the most simple, unfussy option, and you are still able to see the windows in their full glory. The shields are kept in the cupboard when not being used. I hope this helps! Holly @ MillChris Developments Ltd

Hi, thanks for your response. In answer to your question, I am not a tradesman but am quite handy when it comes to DIY. I am happy to do all the finishing work, decorating, boarding out etc if required. I can install the bathroom suite and kitchen units. I have done plumbing previously. The room sizes are as follows: BATHROOM 6' 4" x 6' 3" (1.93m x 1.91m) LOUNGE 13' into bay x 10' 11" (3.96m x 3.33m) DINING ROOM 12' 1" x 11' (3.68m x 3.35m) GROUND FLOOR BEDROOM THREE/3RD RECEPTION 9' 4" x 8' 6" (2.84m x 2.59m) KITCHEN 8' 9" plus 3' 6" recess x 6' 6" (2.67m x 1.98m) BEDROOM ONE (with dormer) 15' 6" x 10' 11" (4.72m x 3.33m) BEDROOM TWO 12' 9" x 9' 4" (3.89m x 2.84m)

Thats a big enough challenge, If you need any assistance with lighting you can always give us a email and i will work with you to assist you with the best prices :) Hope all goes well! Tony