It hasn’t been grouted yet which is why I thought taking up a row and cutting the replacement ones in order to have larger pieces next to the door would be a better look
That is very unfortunate. The window has been installed at an angle and the tile has hightlighted this. Your instincts are correct providing it is possible. It involves rework, no question. That would drive me crazy if left as it is. The question is, is the tile size big enough to cut the edge and end up against the window or is the gap too large for the tile size? Measure the gap from the grout line of the previous tile to the window frame. Are your tiles larger than this?
The original tiler didn't think ahead and plan it out properly, i'd assume that all the tiles are the same size so i doubt its as simple as taking out a row of tiles and fitting bigger tiles [if they exist]. if the tiler had planned ahead you would have roughly even sized cuts at both ends so it looks balanced - i bet you have full sized tiles at the other end of this wall as that was the 'easy' for the tiler.
Jacquelyn GordonOriginal Author
Isla Cherry
Related Discussions
Uneven, stone steps down to my flat..........how to replace?
Q
wall mounted toilet on an uneven wall
Q
Small and Dark Kitchen renovation help
Q
I need help I have a small garden with a piece of fake grass in the mI
Q
Lifestyle Kitchens