Houzz Logo Print
mikayla_sherratt

Kitchen Island sizing help

I'm in the process of designing and getting a new kitchen with an island. However budget is starting to come into play so I'm playing around with the island sizing to get the price within our budget.
We can have a 1200mm deep island (including standard depth cabinets with 300mm overhand for the seating either side so seating facing opposite eachother) it will be 1800mm in length. However doing this is obviously increasing the price due to the cabinets being a standard depth rather than a more shallow depth at 30cm deep. If we did that with a 300mm overhand either side the overall depth would be 90cm which I feel is too skinny but would save us more in cost of cabinets and worktop needed as there will be a downturn at the end of the island also as its coming off a wall so just the one downturn needed.
My other issue is we have 2 options with the cabinets width we can either do 3x 600 wide cabinets which add up to the 1800mm wide given abit extra for the thickness of the downturn. Or 2x 900mm wide cabinets which is the same 1800mm length. But I know with quartz at 20mm thick the size of the 2x 900mm cabinets will be fine to support the over hang of 300mm either side with standard depth. But if we decided to go down the compact laminate route we would need additional supports and I'm not sure it's even doable with 900mm wide cabinets but it is with 3x 600mm wide cabinets and additional support.
I'm trying to weigh up options but dont want a skinny looking island when we can have bigger but if we had bigger we would most likely have to have the compact laminate with additional support added on. But if we went with the 90cm deep option we could stick with quartz because the overall cost would be cheaper. If that makes sense!
Can people advise on what you think, if 90cm will be fine given the 180cm length or if deep would be better? Thankyou

Comments (7)