How can I make this large entrance look inviting?
Stella Hansen
6 years ago
last modified: 6 years ago
Featured Answer
Sort by:Oldest
Comments (16)
Wild Bear & Co Hervey Bay
6 years agoRelated Discussions
How can I make my boring flat pack furniture look stylish.?
Comments (14)I love the colour of the furniture, but I would definitely find some new handles for them. Maybe something in lilac? Like a cut glass, or something ceramic and pretty. Look at Laura Ashley for inspiration but you can find cheaper versions, and usually just as well made, elsewhere. Match the wardrobe to the chest of drawers more and make them look even more refined. Also maybe put something above the wardrobe, like a trunk or something fitting to the room, to fill the space. Love how this looks already though, not much more and it'll be perfect....See MoreHow can I make my bay/bow window look better?
Comments (24)I have similar dilemma with the small window Which to me looks like unfinish. For addition the window sill that the window is put on is very thin and without insulation. I am attaching 2 pictures of houses that I saw in BrIstol. I like a lot how they finished the small bay window. I attached as well Picture of finish between two big bays...See MoreWorkshop challenge - how do I make a big space work and look smart
Comments (8)Hi. It's difficult to say without knowing exactly what the business requirements are. What flooring is down atm as I would go for large concrete effect tiles to minimise flooring costs? Add rugs for texture plus if you need to work on the floor? I would divide the area so you have a work area and a seating area with kitchenette. Use industriał style dividers or bookcases to split the space. Colours will need to be light for working so maybe a very pale grey or white for walls but use dark blue or charcoal velvet for a sofa with maybe a leather chair. I assume the other end of the room is the same? I would build cupboards with shelves ŵall to ceiling, deep enough to hold fabric ( I might be tempted to paint these in a charcoal though!). Maybe look at a library ladder for reaching the top shelves. I'd buy an enormous old desk in wood and leather, have a look in antique shops for the double style desks. You can buy large vintage filing cabinets for any buttons, threads etc ( there's an antique shop in long melford which sells cabinets and desks if you're close to suffolk!) Use a large pendant light in the seating area with floor lamps but maybe look at the industriał style track lighting for the working area combined with task lights for the desk. You could also add mirrors to bounce the light...See MoreTired 3 bed 1900's terrace. How can I make the exterior look nice?
Comments (18)Hi I’m also a developer/PRL, and the best price of advice I was given when I was starting out was to remember that on low to mid range profit projects (if not all projects) controlling your spending is the most important thing to remember, and every £ you spend is a £ less profit. I too hate uPVC windows and would not have them on my own home, but many people do like them and see them as a positive when it comes to buying/selling – just look at the houses either side of your house, and I assume along the whole of the street; people do like them! With my developer head on I would suggest that you try to work with what you already have - clean the uPVC frames inside and out with a solvent based professional cleaner, these really shift dirt and marks, and to a certain extent make scratches less noticeable as it removes the ingrained dirt. Replace the interior handles – new ones can be found online at around £1.99 each if you bulk buy. Replace any worn seals with a new universal fitting seal (approx £16 for 20m). If any of the windows are blown/misted, look at replacing the sealed glazed unit instead of the whole window, again the sealed units can be found quite cheaply online. With regards to your porch, it looks like it is integrated with the front window, so removing it would be a time consuming and costly job, so I would leave it as is and possibly look at just replacing the outer door, ideally one with a glazed panel to give a bit more light. I know you said you don't like uPVC doors, however, composite doors are more expensive. As you won't be living there does it really matter if you install a white uPVC door, as long it is the most tasteful and least offensive one you can find. An alternative would be to install fully glazed French doors with both sides opening, which would possibly mean that the doors can open inwards. All of these can be bought online and be fitted yourself – however, you will need to check if you will require a FENSA certificate issuing for the work, otherwise this could cause issues when you come to sell. I wouldn't advise painting the uPVC, as it is really difficult to obtain a good finish, and nothing looks worse than poorly finished paintwork either inside or outside. As others have said, remove the nets, put up some nice curtains (these can be removed and reused on other projects), don't worry regarding privacy, as again you will not be living there, and it will allow more light into the room. If the privacy angle does bother you, you can always put a plain white voile (costs around £2 per m, and a couple of £ for the rod) up at the window with little or no fullness, which gives a more modern, less fussy finish. I would move the dustbins to the rear of the property, and put a couple of large pots in the front garden – I tend to use Olive trees as they can be shaped and don't mind too much if they aren't watered regularly – these can also be removed and used on other projects. Hope this helps – and good luck for the future!...See Morescottevie
6 years agojulie herbert
6 years agoCelery. Visualization, Rendering images
6 years agooklouise
6 years agoBad Kitty Design Services
6 years agolast modified: 6 years agomacyjean
6 years agolast modified: 6 years agoKK1000
6 years agoKK1000
6 years agoMcDonald Jones Homes
6 years agoCipriano Italian Home Design
6 years agoNathalie Scipioni Architects
6 years agoBluethumb Online Art Gallery
6 years ago
3DFactory Ltd