Before & After - 4 story 1970’s townhouse in Highgate, London
LLI Design
5 years ago
Featured Answer
Sort by:Oldest
Comments (12)
Stephanie Hayes
5 years agoRelated Discussions
Live Chat Series with George Clarke - January 19, at 3pm
Comments (100)Dear @judibutler I assume you are referring to a wall which is wholly above ground and that you have completely ruled out damp tracking into the wall from above. A lot depends on the size and thickness of the wall and other factors, such as if the building is listed. Damp penetration (driving rain) through granite walls has been an ongoing problem in church towers in the southwest of England for some time. Ironically the problem often seems to get worse after re-pointing in lime. Granite is fairly impervious and was often in laid in large blocks meaning trapped water has little chance of getting out through thin mortar joints. Historic England held an excellent conference on the subject in 2013; the transcript of proceedings can be found at: http://content.historicengland.org.uk/content/docs/research/damp-towers-conf2013-programme-transcripts.pdf A roughcast lime render coat may help, but there could equally be voids in the wall which are holding damp and may need grouting. However, grouting is a very tricky and expensive technique which should not be undertaken lightly, and only works if one knows exactly where the voids are. Over-cladding the whole wall with semi-sacrificial weather boarding may be a last resort. This and rendering are likely to require planning consent. Depending on where you are located, a company like ArchiMetric (www.archimetrics.co.uk) could insert some interstitial moisture monitors into the wall to try and find out exactly where and when the damp is getting in and how it is moving through the wall, but this may be expensive. Some localised investigation by dismantling pockets of stone may be useful. The Society of Ancient Buildings helpline (mornings only on 020 7456 0916) may be able to help with specialists in your area. Most importantly try to get an understanding of how water is getting into and moving through your wall before you embark on anything. If your problems relate to below-ground damp then a different response will be needed....See MoreWin an iPad Mini - Vote for your favourite film-inspired interior 2016
Comments (185)Thanks everybody for voting - the competition is now over! And the winner is... Something's Gotta Give! A frontrunner and favourite from the start, you guys didn't hide your adoration for Nancy Meyers Hamptons styled home. The winner will be emailed today confirming their prize so keep an eye on your inbox! Thank you all again for taking part, and we hope you all enjoyed the real ceremony too - all we'll say on that is at last!...See MoreGiveaway: Ideal Home Show tickets and design consultations!
Comments (252)Hi there, the lucky 10 winners have been contacted directly by email and where we have contact numbers for them, we have spoken to them on the phone. If you would like more information regarding winners you can email our team at help@amazingspacedesign.co.uk. We would still love to help anyone who has any design headaches with their rooms - so please come and chat with us on our website....See MoreChoosing aluminium sliding doors
Comments (16)It sounds like you need some fully coloured up / rendered drawings [elevations or 3D] of at least two options [maybe more], one with white frames and one with grey / anthracite frames so you can compare. I don't think there's a right or wrong answer, just your personal preference. I usually specify an off white / ivory colour for window frames as this is more subtle and doesn't show the dirt as much. You could possibly look at a very light grey / silver as an alternative. Depending on the manufacturer and cost you could go for a coloured anodised finish which will give it a slight sparkly sheen. You can also get bi-coloured frames, different colours inside and out. I think anthracite coloured and bi-fold will look clunky and out dated in a few years, fashions come and go. If you don't want curtains overhanging the frames 750mm probably better than 600. However, speak to your curtain co. now before you get the work done as they should be able to tell you how much wall space you need. Thicker curtains with backing fabric take up more space. Have you considered timber blinds as an alternative, shouldn't take up as much space? Personally, I think a split of 3 panes is better. Always in odd nos, 3, 5, 7, etc. This means your eyes subconsciously centre on the middle pane. This is quite a classical, ordered approach [look at stately homes porticos] but it works. If worried about visible glazing frames go for ultra slim sliders such as ID Systems 'the edge' or Schueco, Raynaeurs are good but expensive....See MoreLLI Design
5 years agoE D
5 years agoLLI Design
5 years agoPatrina
4 years agoAL PAINTING
4 years agoTom Faulkner
4 years agofoxmonika
4 years agoViktoria from houzz
4 years ago
Hampstead Design Hub