Swimming pool design

ZANA Landscape Design and Contractor Plc.

8 years ago

Residential pool with water fall,
Wood and concrete as a construction material for pool and deck and natural rock can also work. I like to get your comment about the design and what you think about it in general and this is just a preliminary design so is adjustable! Thanks.

Comment

Related Discussions
Swimming pool design
Q
Comments (0)
Modern design for Residential pool with water fall, Wood and concrete as a construction material for pool and deck and natural rock can also work. I like to get your comment about the design and what you think about it in general and this is just a preliminary design so is adjustable! Thanks.
...See More
Battery operated swimming pool light
Q
Comments (1)
Submerged swimming pool lights are designed to be built into the pool walls as they are being constructed - they are safe for swimmers because they are recessed into the pool wall. An underwater battery operated light would have to be fixed to the pool wall and would be a safety hazard for swimmers. All modern pool lights are 12 Volt and power is provided by a cable to a 240/12 volt transformer in the pool control panel. Lights can be installed retrospectively but the pool would have to be emptied down to the light level (about 500 mm below the water surface)
...See More
Contemporary Swimming Pool, Somerset
Q
Comments (2)
I have a holiday home In Somerset. Unfortunately I don't have that pool. I'd love it. Perhaps they'd like to share :-))
...See More
Swimming Pool Surround Design Ideas!! Help!!
Q
Comments (12)
I worked in Australia building swimming pools, including some celeb clients. If you can, try to get hold of a copy of ‘poolside’ magazine from Australia. This is a consumer magazine and should give you lots of inspiration. Construction-wise we would normally pour a concrete ring beam around the pool deck that would anchor into the top of the pool sides with metal rebar dowels. Next the bullnose pavers would be overhung around the edge of the pool and then paved up to, before grouting. By the looks of it you’d be retrofitting this pool surround so could cause structural issues if the ground around the pool is not well compacted, and the ring beam moved, while being attached to the pool itself. With this in mind, you may want to look at something like compacted hardcore with a resin bonded gravel over the top. This will be non slip, can flex, if the ground moves, and by the time you’ve poured concrete and then paved it, would be cheaper and faster to install. Aesthetically, it may also be a good fit? Am not sure on compatibility for use around pools - perhaps seek reassurance from a U.K. provider first and then contract a reputable local provider. Decking is another option but slip resistance could be an issue on natural timber and the synthetic stuff fades and warps. Hope it goes well : )
...See More

Swimming pool design

Comment

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US