How would you varnish wood so no water penetrates?
sarah
3 years ago
last modified: 3 years ago
We have this beautiful oak stand for under a sink which was originally varnished although I'm not sure what with. The contractor told me it's impossible for water to mark it. They were wrong. The oak has damp areas and I really don't want it to get ruined. It wasn't cheap.
I've attached an image on the sink and stand. Does anyone know how to seal it properly or recommend a company that can do it for me?
Thanks!
Featured Answer
Sort by:Oldest
Comments (8)
Related Discussions
How would you refurb this staircase?
Comments (52)Probably a bit late on updating this but I thought I'd lost some photos of the end results. I think pretty much everything has changed since those original photos. The staircase has been painted white. It took a few coats of Zinsser BIN and a few coats of acrylic primer undercoat, with sanding between coats. Gaps between the labelling were caulked and I fitted some trim over the rough sloping section before the top coats. The stringer was completely stripped and then filled as best we can - due to lead paint fears we couldn't just rub it all down. All woodwork was finished with Little Greene intelligent eggshell in Loft White. The walls are Little Greene Intellgent Emulsion in Slaked Lime. It's a very warm white/neutral. It looked plain white when it was first painted but the white skirting transformed it. It also wipes very nicely. We had the walls replastered before painting. The tiled floor in the hallway was ripped out. We now have decent quality laminate throughout the hall and living room. Quick Step Soft Oak Natural. Carpet was fitted and supplied by the same person who did the laminate flooring, a very good local fitter. We only recently got the stairs and landing carpeted as we were waiting for our other refurbishment projects to be finished. Before it was carpeted we also had a local carpenter repair the stairs which were very creaky and the wonder treads very loose. The underside was removed so it could be properly repaired underneath. I took the stupid box catch off the door which didn't work properly and fitted a nice handle and magnetic catches. We have new engineered oak internal doors downstairs which I bought online. All it really needs now is some finishing touches like some photos or pictures on the wall of the stairwell. I'm very happy with the end result....See MoreInterior doors - change door handles and strip varnish
Comments (8)Hello Jennifer, Sounds like a lovely idea! For wood stain, it may be that you can just sand the doors to remove the stain. If it was painted I would have suggested a heat gun, scraper tool and sanding or Nitromors scraper tool and then wire wool, water and sanding.... Hopefully the wood stain might be a lot easier to manage! Especially if you have animals or nippers around... For the locks... It could be straightforward If you can align the rim lock and door jam so it's in line with the holes in the door.. I'm no chippy here! So maybe you might want to hire one to do it for you, it's a small job really but one you want done right.. I have a collection of old doors someone didn't want with loads of holes all over the place from previous owners....(I made them into a screen).. but I could see all the botch jobs that had taken place over many years...... : )) The box lock as they are known is a surface mount whereas other styles aren't so you may have to do a bit of filling depending on what is already in situ.. There are lots of helpful tutorials on youtube one here you might want to have a look at too..So a few ideas.. : )) https://www.youtube.com/watch?v=hlCnfI64zgs...See MoreTo varnish or to paint?
Comments (14)Creative org, I agree. The colour above the fireplace in the original photo is slipper satin. I can see how that would work and the bright white doesn't. If I do that though, I need to paint the entire room and potentially change the brass fittings and the rug and all the cushions in the entire room. The new white cour from f&b doesn't fit in with slipoer satin f&b, which is leading me back to wood stain. However, check out the photo now attached. I love this room - but this is old white estate eggshell and seems VERY dark when I try it in my house. But it's exactly the look I'm trying to achieve!...See Morehelp on varnish colour!
Comments (21)We did osmo polytints 3040 followed by 0smo raw 3044. Wood finishes direct give advice about this. See their blog’ beautiful white wood finishes for dreamy white interiors’. Prior to any of the osmo we applied lye to the floors. This is apparently what will stop the eventual yellowing of any other treatment. The final effect is very natural looking. See the photo of white pine with oval room blue. This room was finished about 3 years ago and gets full sun as it is south facing.It is really easy to keep and does not need sanding back again before re applying in the future. It is not for you if you like the shiny polished floor look! Hope this helps....See More
sarah
3 years agosarah
3 years agomii2
3 years agoRowland
3 years ago
Sonia