Help finding the right bed!
I'm over the bedskirt look for my master bedroom. We've been updating and want a bed that will work withour current night stands and dresser. Many platform beds are too low. Thank you for suggestions!
Comments (10)
J. Appelbaum
2 years agolast modified: 2 years agoRelated Discussions
Need help with finding the right console table!!
Comments (0)I have been trying to find a console table with the right dimensions - 26cm depth, 90\5cm height and 140 cm width. I found a lovely design on Oka website: The rivulet design -http://www.okadirect.com/furniture/tables/console-tables/ Does anyone know where I could find similar but taller? Or if someone could make one? Many thanks!...See MoreHelp find me the right architect for my project
Comments (2)Finding the right architect will make a big difference to your experience of this project as well as the over all success of the finished product at the end so I would really advocate that you keep looking for one you can be happy with! It's good that you have been looking around already and a great place to continue the search is over on the RIBA's website in their 'find an architect' tab if you haven't already tried it. Here you can narrow your search down based on geography and specialism. You can also have piece of mind knowing that every practice listed is legitimate and therefore bound by the RIBA as well as the ARB's codes of conduct. Here is the link: https://www.architecture.com/FindAnArchitect/FAAHome.aspx Hope this helps!...See MoreFinding the right splasback
Comments (7)What colour to you want your window sill? Are you looking for the sill to match the window colour? If so companies sell upvc in white, oak or rosewood colour. A joiner should be able to make you a timber sill if that's what you want. Alternatively Axiom by Formica sell their splashbacks complete with a edging strip as opposed to Bushboard (from memory) who don't. Look online at Axiom colours and see what's included within the cost of the splashbacks. If you don't like what they have to offer you can look at Prima, Omega or Egger as standard splashbacks but most times they do not included any edging. A good joiner will be able to source a laminate sheet to match and rip down into strips in the same colour but do be aware that the matching sheets are large so you might have to pay for the cost of the whole sheet even if you do not use it all. Where are you based? Do you have a specific pattern number/code in mind?...See Moreto find right paint colour
Comments (3)Do you have an image or link to the wallpaper? It may be worthwhile going to a paint trade store such as Johnstones or dulux to get the paint colour matched....See MoreJ. Appelbaum
2 years agoWe have a king size bed in this space and want to continue with this. I want to modernize the look and realize that the bed will be lower than what it currently is, but don't want what would be considered as very low. Like this Pottery Barn bed, but believe the mattress top will be about 10" lower than our current mattress. Does it also matter that nightstand tops are higher like pictured here?
J. Appelbaum
2 years agoIf I were to use a bed like this one, is it too square with the rounded edges of my nightstands?
decoenthusiaste
2 years agolast modified: 2 years ago1" above or below arms; level with mattress top.
J. Appelbaum thanked decoenthusiasteJ. Appelbaum
2 years agoJ. Appelbaum
2 years ago
PROMARGARITA BRAVO
2 years agoHere are a few of the bedrooms we have designed. Please take note of the beds along with the nightstands. Maybe this will aid you with your dilemma some.
Denver Townhome Renovation And Decor · More Info
Denver Townhome Renovation And Decor · More Info
Observatory Park Home Renovation & Decor · More Info
Downtown Denver Condo · More Info
Evergreen Design and Decor · More Info
Cherry Hills Residence: Bedroom 1 · More Info
Castle Pines Village · More InfoJ. Appelbaum thanked MARGARITA BRAVO
decoenthusiaste