skip to main content

Plumbing Appliances Polls

Test and test and test

14 days ago

Test

Sort by:Oldest

Comment (1)

Faezeh Rahmani
14 days ago
Test
Related Discussions
Will Your Floor Pass A Pendulum Test?
Q
Comments (0)
Despite there being numerous steps put in place by the health and safety executive, there still remains a high amount of slips and trips in the workplace, causing people to be absent from work due to personal injury. For every accidental trip that happens resulting in an injury, it is so easy for someone to pick up the phone and call a personal injury lawyer. Will your floors stand up to the scrutiny in the event of a claim? The Health and Safety at Work Act (1974) requires businesses to take preventative measures to minimize the risk of slips and trips in the workplace. In order to pass a health and safety inspection in new businesses, there is a chance that a planning officer may test the floor surface to get an accurate reading of slip resistance. The tests used to ensure your floors pose minimum risk include: 1. Pendulum test This is also known as a portable skid resistance tester and it is subject to British Standards: BS 7976: Parts1-3, 2002. Using an imitation heel, the device will swing over a sampling of the floor surface to record the Pendulum Test Values (PTV). The Pendulum test has proved to be a reliable and efficient method of floor testing, however a flooring technician trained to use the Pendulum must use the device. The preparation of the rubber slider must be set up accurately to test the conditions of both dry floors and contaminated floors. When water is on the floor surface, that’s when slips are likely to happen. To minimise the risk of slips happening on wet floors, commercial premises must have a PTV of 36+ minimum. 2. Surface Roughness Testing A surface roughness meter can be used to supplement the data obtained in the Pendulum test. It is a quick and efficient method to test solid hardwood flooring. Ideally, the test results would be over 20 µm, meaning it has low slip potential. If your score indicates a moderate or high slip potential, then a higher level of floor roughness will be required to minimize the risk. A thicker veneer coat may also help increase the surface roughness score, lowering the slip risk. Manufacturers Data Sheets All flooring manufacturers will provide product data sheets, safety information sheets, and technical data sheets in compliance with European Directives. The flooring data sheets are what every business owner should have in their business records, providing details that they have in fact, installed non-slip flooring in accordance with the Health and Safety at Work Act 1974. Accidents do and will happen, but when they do, they will be just that. An accident! It may be due to human error, carelessness, or an untied shoelace. But the fact remains that if you have your surface roughness test showing a low slip risk, combined with a PTV of over 36, and follow the safety advice for the cleaning and maintenance of solid wood flooring (or engineered), then you will have done everything in your power to protect your employees from the risks of slippery floors.
...See More
Power flushing and pressure testing old radiators v's buying new ones!
Q
Comments (1)
Unfortunately, this might be the case. You need to be really careful with them first off and they need to be looked after. If they are on the system still and not leaking, that is good news but we would still recommended they are pressure tested. Due to the weight, they are difficult and expensive to transport (pallet carriers cost a minimum of £60 each way). We would strongly advise against powder coating them as well as the baking process can destroy the seals between them; they should be wet-sprayed. So the costs do add up. We used to sell reclaimed cast iron radiators but moved away from that as the reproduction models are so good and easy! Good luck and remember us if you want a quote for some reproduction models :)
...See More
Test dilemma
Q
Comments (1)
commenting
...See More
My test render.
Q
Comments (0)
Trying to get to realism to my renders.
...See More

Sponsored

More Discussions

Our kitchen/dining/living space quandry

11

separate toilet from main bathroom

6

Redesign Layout

4

Is it okay to have different window styles?

5

Scented plants and flowers

2

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.