Damp Mould Problems
Jane Shepherd
9 years ago
Featured Answer
Sort by:Oldest
Comments (11)
COLD AND DAMP SEAL
9 years agoRelated Discussions
Alternative for air vents - damp problem
Comments (2)Get a decent de-humidifier/air purifier... Run it for a few hours each day (placed on hall/landing for example) and it will clear up. Also, get a humidity monitor/sensor and keep an eye on things... Also, do you have a decent extractor fan in your bathroom? We had mold and fitting a decent extractor in bathroom plus getting a decent dehumidier/air purifier sorted it out (note our damp only started after an upgrade to windows, also note we have vents in walls too, they didnt help!)...See MoreHelp - Is this damp or a leak?
Comments (6)I think it's a leak as well. We had an almost identical problem in the kitchen, less than a year after complete renovation; it took another year until we had it sort it because the builder argued it wasn't his fault and wouldn't show up to have it fixed, etc. In the end, he finally came and I wanted to kill him: the pipe connection for the outside tap hadn't been tightened enough and it was dripping... all he did was to rotate the valve (or whatever that's called) and it was all sort it... ahhhhhm!!! Of course, we had to put up with re-plastering, waiting to dry, painting, etc, the whole thing took ages... So, whatever you do, don't leave it for too long, unfortunately it's only going to get worse....See MoreInsulating a damp bathroom that already has exterior render?
Comments (4)Hi Guy, Internal solid wall insulation usually involves fitting ready-made rolls or boards of insulating material over the inside walls of your house. This can be disruptive - You may need to relocate, radiators and fitted furniture as well as a slight reduction in floor space owing to the extra thickness of insulated walls. . Your walls will need to be carefully prepared before internal wall insulation can be fitted. Any damaged plaster needs to be either repaired or removed, and bare brickwork should be treated to eliminate areas where air can escape. We would also suggest painting on a waterproof paint on the wall so no water penetrates past the brick. Hope this helps? For more tips and advice check out our blog. We love sharing our expertise as we build lofts, extensions, bathrooms, and kitchens all the time :). Opun - your home improvement experts...See MoreBasement in London with damp issues - what to do?
Comments (2)Hi Zi, Without a survey it is difficult to say if the paint would work for you in the same way as your neighbour. It may be that she has extra block work inside that acts as a barrier to any leaks which your side may not have. I understand why you would want to go for the more cost effective option, but best to get a damp survey to be sure and save paying for works that may fail in the short term. Tara Taylor Project Manager Essex and London Construction, Basements, Extensions and Loft Conversions Limited tara.taylor@essexandlondonconstruction.com www.essexandlondonconstruction.com...See Morestandroid
9 years agoMatthew Decorator
9 years agodikiz
9 years agoOnePlan
9 years agoKim Davey
7 years agoLED first choice
2 years agoKim thom
2 years agoarc3d
2 years agoKim thom
2 years ago
puffinrock