skip to main content

Parquet flooring or not

Georgina Carlisle

9 years ago

Hi All I need some advice about flooring for this kitchen it's being fitted in a large room which will have space for a dining room couch etc. I would like to fit pale parquet flooring but worried it would too much wood. Any advice would be great we won't be using the glass splash backs as I'm not keen on the colour what do you think ?

Sort by:Oldest

Comments (2)

PRO
OnePlan
9 years ago
Maybe have a richer/darker coloured floor - as a lighter one will age to look darker after time anyway - so you wouldn't get a match. Herringbone is quite 'in' at the moment !
PRO
Home By Design Ltd
9 years ago
Use our parquet ceramic tiles they would look absolutely stunning! Oh and as for the splash back- I love them!

Jade
Related Discussions
Which direction should I lay parquet floor
Q
Comments (34)
Taken me sometime as just wanted to exhale and enjoy the moment. Very long post sorry. Preparation Research the job - there are loads of videos on You Tube of what to do and how best to do it; I somewhat took the best from all. Buy more than needed as it's easier to take excess back rather than fall short. Blocks 1. Blocks no longer need to have all the bitumen taken off. There are now adhesives that can do the job without all the scraping. I found companies that could take all the bitumen off but it would have cost a tidy sum. I used Lecol 5500. But the sides and tongues still needed to be cleaned in order to get a good fit. 2. If the tongues are damaged the blocks can still be used. You could actually take them all off and still have a good finish. I wasn't going to do that to close to 3000 blocks. Again, I found companies that would do this. 3. Spend some time grading the blocks - size, height, wear, complete (tongue). It really does help when laying, and therefore sanding and the finish, as you then don't have huge amounts to level out. Surface 1. Ensure you have a sound subfloor. Luckily I already had one but had to still take it up as I put some sound proofing down under. 2. Make sure level with no screw heads locking out and no squeaks as the last thing you want is to lay it and the floor squeaks all about. Laying 1. Measure, check and double check. Including borders and expansion gap. 2. As shown in the videos lay a crown line: The centre of the room is the backbone of the whole floor, it ensure rows are straight going forward. 3. Start early, especially if you think you can do it in one day. I took a week, doing some everyday after work. But this helped as the previous rows were then hard and didn't move. The adhesive will be a bit slippy and moveable until it's dry so don't walk on it. 4. Lay each row 'dry' to ensure that they will sit together before applying the adhesive. It takes longer and maybe a little messy ( adhesive overlay ) but worth it. 5. For the border, overlay where you've measured where the border should be (making sure not to add adhesive over your marking ) and then use the saw to take off the excess. As it wouldn't have had the adhesive on it'll come up super easy and leave with a clean finish. Sanding, Filling and finishing. 1. If sanding yourself find a firm that has a Trio and belt sander. Absolutely brilliant machines. As they have three rotational disks perfect for parquet as difficult to sand along the grain with belt sander. I used the belt first until the 60 paper grade and then switched to the Trio. 2. Use 60 or 80 dust mixed with resin for filling. Again loads of videos on the Tube. I used Lecol 7500 resin. I filled it twice sanding in between. 3. Research the finish you want and if not sure take an example to a wood flooring specialist to get their advice.
...See More
Herringbone Parquet Floor Inside & Out - Help!
Q
Comments (8)
Hi Barney, That sounds fab and I'm sure it will look beautiful. Just a quick comment on parquet / herringbone tiles after some recent experience on our renovation project, you probably know this already but I didn't and it ended up as quite an expensive learning for us; cutting tiles to a herringbone pattern is super time consuming! No problem if you get a fixed price upfront or are doing it yourself but having just had our new walk in shower tiled (2m x 1m) in a herringbone pattern I was astounded by how long it took and the complexity of all the 45 degree cuts! It looks stunning but I selected the tiles and pattern with aesthetics in mind and definitely with no comprehension of the cost implications :) Best wishes, Claire
...See More
Can I restore this parquet flooring?
Q
Comments (2)
hi Elizabeth, The floor that you have is nice and is laid with an integral backing from your photos. it is thin as the pattern is small and it is an overlay floor, using the substrate for the strength. you can certainly lift the floor and relay it in a room of your choice. with time and patience I'm sure you will be able to restore the floor yourself, if this is something you want to do yourself. the original floorboards will be ok underneath the parquet, although they may require sanding to remove residual glue. you will need a slight transition strip at the door to get you down to the existing floor height, but it will look fine. it may be worth getting a flooring company to give you a quote for the sanding as this can be a challenge. good luck and enjoy your new home!! best Rowland
...See More
Hall and stairs and a parquet floor.
Q
Comments (7)
If it's dark wood... it's dark wood. It's nice to preserve an original feature but sometimes it just doesn't work anymore so it's time to update. If it was a mistake to use such a dark floor in a dark hall you shouldn't have to live with that mistake just because it's old. Option 1. Remove it and use it elsewhere in the house. Some of it can be used to make furniture or a wall feature. Replace with light floor of your choice. Option 2. Leave it as an original feature but cover over it with a new floor. Laminate / carpet etc. It's always there in case you want to bring it up again at a later date. Option 3. Use stain on it as required and accept that it's a dark floor. Use light paint on the wall and a large runner down the middle to cover enough of it so it doesn't have as much impact. Think of other ways to brighten up the hall e.g. increase the glazing in the front door or the door into the kitchen, remove the small wall next to the kitchen door and replace that with a glass panel, use mirrors, add artificial lighting etc.
...See More

Sponsored

More Discussions

How would you extend?

13

Bland exterior - any improvement ideas?

8

has anyone converting old kitchen into loo/ boot room/ utility???

2

Our kitchen/dining/living space quandry

3

mirror frame advice bathroom

2

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.