skip to main content

Can you tell exact make and color of the thin brick veneer depicted?

9 years ago

Atomic Cafe Coffee Roasters-Thin Brick Veneer · More Info

Sort by:Oldest

Comment (1)

PRO
Stone Farm
9 years ago
These reclaimed bricks came from the Alice Mill in RI that burned down in 2011. We call this our Blackstone Valley blend, which we are currently out of at this time. This blend was speckled with a hearty array of blacks soot-stained bricks as well as reds. Please refer to our website for other brick options. We currently have our New England Mill Blend, our Baltimore Blend and our Lime Wash Reclaimed Thin Brick available.
Related Discussions
Kitchen help - what can we do to make it look better?
Q
Comments (65)
Depending on how far you budget goes, I would look at adding traditional cornice and pelmet and replacing the plinth with a similar oyster colour. End panels for wall units could also be replaced / added. Some chessboard style tilling in 3 colours would also bring out the walls. It's hard to tell but is the oak surround also on the wall units? I haven't checked your location but this is something we can help with
...See More
help with paint and tile colour
Q
Comments (9)
Hi any ideas on what colour paint or style of wallpaper I could use on the main wall , new sofa is charcoal and black , floor is oak and was thinking of painting the walls a very pale grey( dulux just walnut ) the problem is the feature wall looks really busy with the tv and fire so I am struggling to choose a paper or paint colour any ideas would be greatly appreciated.
...See More
Colour door?
Q
Comments (4)
Hi Jen, It looks like a whitewashed timber door. You can see the timber pattern and yellow colour of the timber coming through under the paint - (my guess is Oak as Pine would be a bit more knotty). Perhaps when asking for a finish ask if they have a whitewashed oak option or order unsealed and paint it yourself with very thin layers getting the effect you want. It is also regular, so it hasn't been wiped or sanded back to make it look "rustic" so definitely call the door manufacturer rather than searching online or else you will find it difficult to get this specific result. This could also just be a proprietary finish of the door manufacturer - which is the most likely option. If you found out where the door comes from, the company will probably have lots of doors in the same finish. It could also just be a light veneer (some cheaper doors have an "oak veneer" but they kind of get the colour wrong and it kind of looks like oak. This is the closest I could find after doing a quick search. http://internaldoors4uk.co.uk/interior-doors/pinea-snow-crosswise.html I think its best to find a manufacturer and show them your original image. They know their doors the best and will be able to get you the result you are looking for! I spend most of my days calling manufacturers asking if they do a specific finish, so be patient and call a few. You will find something. I hope this helped. I would love to know whether you find what you are looking for. Goodluck. Jo
...See More
Tell us: Do you have any home renovation regrets?
Q
Comments (32)
Whilst I recognise there's a few tradespeople on here bemoaning fussy clients I have to say my biggest regrets when renovating my house was not being specific enough with trades! We had an electrician put in an extra light switch in the hall to control both the downstairs and upstairs lighting. He put it in a good 10-15cm lower than the other switch further along the same wall which looked completely ridiculous. Made him move it in line with the other one much to his annoyance. Another similar incident was with a vertical column rad for the kitchen - whilst I was specific enough this time to ask it be centered to the wall it was on, he installed it much higher than needed with about 30cm of pipe sticking out the bottom! It would have looked much better in line with the doorframe adjacent. Had to learn to live with that one. We had engineered wood floors put in upstairs - the fitter used the shortest wall in the smallest room to take a plumbline from. When it came into the hall it was obviously on a complete wonk. By this point I'd gotten a bit better at speaking up and ensuring we actually got what was needed (and paid for!). He had to take it up and re-lay using the hall as the plumbline. Looked so much better but he was extremely annoyed! After all this I learned to use masking tape to direct exactly where pipes/light switches/trim should be fitted so there was no room for 'interpretation'. I also forced myself to speak up more and advocate for what I really wanted. That said I'm a designer by trade so I generally know what I want and how to make it look good but was definitely a bit too shy to contradict trades in the beginning!
...See More

Sponsored

More Discussions

Proposed floor plan help please

62

Too much blue. what other color is right here?

34

Paint, wallpaper feature or painting?

8

should I paint the tiles white?

6

Existing canopy in garden - how to enclose?

0

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.