skip to main content

how did you terminate the black pencil tile at the top of the shower?

8 years ago

I'm looking to do something similar but there is no black bullnose tile. how did you end the tile as it goes to the wall.

Guest Suite Bathroom · More Info

Sort by:Oldest

Comment (1)

PRO
Architectural Resource LLC
8 years ago
I will have to check that next time I am out there, Abel. I thought that there was a bullnose on that detail.
Related Discussions
Need help 'styling out' black/grey bathroom
Q
Comments (23)
Hi Michael, Sorry, but I have to partially disagree with you on this, daylight colour temperature is 6500K not 4000K. Yes, 4000K is warmer than 6500K but it does not give a truer representation of colour. Colour representation is measured using the colour rendering index or CRI. The closer to 100, the closer to daylight. The Megaman LEDs are 80 CRI for each of the colour temperatures. That said, the 4000K fitting will produce a brighter and cleaner feel to the room. However, it can look too harsh at night. 2700K is closer to traditional halogen fittings. It can look duller during the day, but looks a lot more welcoming in the evening - perfect for a soak in the bath. It comes down to personal preference in the end
...See More
help with tiling in the bathroom pretty please
Q
Comments (33)
These are the tile samples I have so far. On the left - small top dark grey, under that is a tile with faux stepped marble effect tiles that are more slate toned. Large tile to the right is the mandarin stone one (v expensive, lol) The walnut in the middle I love the pattern but it’s not as rich a colour as I wanted and I can’t find anything else online in an American walnut style tile. The bottom tile is a v v pale grey with similar pattern to the mandarin stone one. How would you work these tiles together? Walnut floor and sink unit and dark grey all over the walls? Just the patterned grey on the back of the shower wall and sink area and plain grey on other walls?? :0/
...See More
can you really effectively paint over tiles?
Q
Comments (20)
If it was me - and considering the tiles are unnecessary (because I’m presuming there is no bath or shower in this room and there is just a wc and sink??) and you want to update it without ripping them all out ... I would look at panelling the bottom half of the walls under the sink and around the room in a wood - painted with a suitable washable paint in a colour that works with the pale pink. That will take off the impact of all the walls being tiled. Then by the time you have added in some shelving and mirrors (heck, you could even have a mirror fitted all the way around the room if you wanted to!) the tiles won’t be that bad. Super pale pink is very fashionable at the moment and at least it’s not 50’s pink which we had, ha ha. Either going navy as a contrast or a rich grey would work or keep it all light woodwork with white and add in metallic shelves and mirrors in gold to compliment the pink. Cladding would work in the thin marine plywood and it looks great painted. It’s not a huge room so shouldn’t cost that much and you can get all the panel sections pre-cut at a diy store if you don’t have the room/facilities to chop them down yourself. There is T&G panels although they are more work and can be a bit dated with your tiles perhaps. re painting tiles.... the paints have come a long way these days to be fair and as they won’t necessarily get wet (add some feature tiles around your sink) then they shouldn’t wear out easily. The trick is to apply it correctly and don’t cut corners. Watch loads of videos on how to do it. I don’t think painting them will make a massive difference unless you were going to go with a dark paint though so seems little point.
...See More
Help with bathroom tile design
Q
Comments (30)
Hi, if you did that, the box would be a very prominent feature and unless the box was the same width as the window sill you would have one surface slightly wider than the other which would look unbalanced so ideally I would leave around 100mm - 150mm between the two surfaces as in the photo. That said, it does depend on the height of the window sill from the floor. These details can be difficult to call which is why we use software and get a 3D visualisation. In answer to your second question, yes you could use chrome or satin nickel finish strip or a glass pencil tile to finishes the top of a tile very nicely and avoid that awkward edge created with a ceramic tile. You could use the strip on its own or with a mosaic of some sort - the pink and grey scheme was an Art Deco style set we did for a bathroom showroom. Chrome strip is versatile and can be used to add that touch of sparkle to an otherwise neutral and understated scheme .
...See More

Sponsored

More Discussions

Opinions and suggestions on Howdens Kitchen Design

17

Advice re updating a tiredbedroom please

11

Above garage extension to create primary suite

18

Inserting a bathroom downstairs and adding a separate toilet

4

Garden vs Garage dilema. Please help!

10

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.