Reassure me about our oak windows!
Louise Inglis
8 years ago
Featured Answer
Sort by:Oldest
Comments (6)
Amber Jeavons Ltd
8 years agolast modified: 8 years agoLouise Inglis
8 years agoRelated Discussions
Talk to me about hardwood floors
Comments (6)I have been a wood flooring professional for over 30 years, so my response might be more detailed than you want! I'll break it down into several issues and you can choose which bits might help you the most. Color: If you have children, a medium stain/wood might serve you better because dark floors show dust and dirt. Wear: A wood that has a stain on it that is much diferent from the wood's own natural color, will show scratches more than a wood with no stain. A matte or semi-gloss finish will show fewer scratches and wear. Composition: What is your subfloor and where are you located? Both these factors will help determine the material to use. Solid- This flooring is made from pieces of wood that are one solid piece from top to bottom. So, if you want oak, the wood is all oak. It can come from the mill already stained and finished (prefinished), or it can be finished at the jobsite after being installed and sanded. Engineered- Engineered hardwood flooring is constructed of two components, a ‘core layer’ on the bottom, topped by the ‘face veneer’. The veneer, or wear layer can be of differing thicknesses. The thicker the wear layer, the more times the product can be sanded. The core layer is constructed of multiple layers of wood which can be of the same or of a different species, glued together in a cross-hatch configuration. This cross graining provides greater dimensional stability, minimizing the expansion and contraction that natural wood exhibits when exposed to varying moisture levels and temperatures. It can come from the mill already stained and finished, or it can be finished at the jobsite after being installed and sanded. If you are going to install one area now and another later, you might want to choose an unfinished product that can be sanded and finished at the jobsite. You also want to ensure that you keep a record of the materials used on the first section so that you can match the second section after the color has changed. They will both end up the same (or at least very similar) color after a few years, but they will both change over time. The other way that you can ensure that they match is to purchase enough prefinished (which has the stain and finish applied at the factory/mill) material for both areas at the same time. For the best match, mix the wood from all the boxes for the first floor, then repackage the rest. Store it in a dry place until you are ready to install it in the other area. Purchase products and hire a professional that are members of the National Wood Flooring Association. They set the standards for and provide education for our trade. They offer certifications in installation and in sand and finish which oprovide homeowners further assurance of skill and competence....See MoreTell us what do you think about our latest project?
Comments (15)Actually Amanda, I've cooked with gas for years but now I have induction I'd never go back. The heat is instant and adjustable in just the same way as gas however the heat distribution is superior as it's more even. The other advantages are that the hob doesn't get anywhere near as hot so it's far safer, especially with young children, also cleaning is much easier as there are no bits and bobs to remove and, as the hob doesn't get hot, no burnt on residue if there are any spillages. Before I bought the hob I was concerned about heat distribution in a wok as I stir fry a lot, but I can honestly say it's been great with that too. I don't have a minimal kitchen, just a sleek counter, and personally I find the bulky Wolf hobs unattractive, but each to their own. In summary, in my opinion, gas is good but induction is better. That said, I'm not keen on this kitchen at all, sorry St James. Normally you give great advice and suggestions but here the sockets look wrong and I'm not keen on how they look on the tiling. What matters though is the clients opinion, so if they love it that's brilliant....See MoreHow can we improve our lounge?
Comments (12)I'm not sure making the fireplace look heavier would be a good idea. However rather than fight the off centre I would work with it. Possibly wall hang the TV to the right of the fireplace it looks as if that would make it quite good for viewing from the sofa. Get a bigger rug which would still be off centred but would pull in/integrate the soa area more. I wouldn't put the TV in front of the window as the blockage of the view could feel negative and if the sun shines through during the day difficult to see TV without drawing curtains. What about a mirror above the fireplace you seem to have a window at each end of the space so a mirror could act like a third window reflecting light and giving weight to that are away from the TV. A window seat could work nicely....See MoreHelp me finish our living room please!?
Comments (7)Hi Elizabeth, I absolutely agree that you need to soften the look and going for a geometric or retro pattern will also add a bit of interest too and make your room feel more alive, In terms of colours I would say that if you want a more luxurious feeling the navy is the way to go for and if you want more retro then orange would be best. Do have a look at our selection of rugs on Hutsly and you might just find the piece you are looking for like one of these: You can see the whole collection of rugs here: http://www.hutsly.com/collections/rugs Hope that helps and good luck! Hutsly...See MoreAmber Jeavons Ltd
8 years agolast modified: 8 years agoLouise Inglis
8 years agoCHT Joinery
7 years ago
Jonathan