skip to main content

Building a Home Renovating Home Repair

URGENT HELP - Water under tiles

4 years ago

We have had very heavy rain for 48 hours, and it seems water has got under our kitchen tiles. There's seems to be 7-8 affected but only by the back door up to the washing machine. But the rest of the kitchen is fine.

I have a feeling the water is coming through the backdoor? Would this be the culprit as the water seems to be localised?

Sort by:Oldest

Comment (1)

User
4 years ago
Check the connectors to the washing machine first. That was the culprit when we had is many years ago. Ended up having to replace entire kitchen floor because we didn't spot it for ages. If it's not the washing machine, then yes, it might be coming in via the kitchen door, but this is less likely if it's properly fitted and hasn't been a problem before.
Related Discussions
Help me choose kitchen worktops and possible splashback/tiles
Q
Comments (13)
Hi, I've now had quartz worktops fitted in a white with grey and mirror flecks (compact lactea) & attach photos. Cabinets are all done too. My next area is what to do for splashback behind the hob/under the extractor. I originally wanted to do red glass across the length of the wall, but we have had under unit lights fitted below the higher cabinets and at night I can change these to any colour I want. If I do red all across I won't get the effect of the lights. Not even sure red would go? The wooden chairs are going and will be replaced & I still need to choose my island lights (thinking 3 pendants hanging). Husband thinks stainless steel sheet behind hob. I'm not sure this will look right with dark glass hob under it & wonder if it is hard to look clean all the time. What ideas do you all have as you helped with the worktops. I also show the dining table and the new open lounge area (intend to put a rug down). We also still need to find wall lights.
...See More
Please please help! Urgent advice on decor!!!
Q
Comments (11)
As Minnie says, not a fan of chalk paint on furniture, it has it's places, but for a washable surface with kids around it's a big No No. It has to be sealed and then it doesn't look like chalk paint anymore - and, quite frankly it's a load of old B*** that it sticks to almost any surface - almost being the operative word there. You can paint ikea units. Scratch the surface with a fine grade sandpaper 120 grit....then use a good quality water based primer - we use dulux. ( one coat should be enough with dulux ) Then buy a waterbased satinwood paint - also our preference is Dulux Diamond Trade..............you can pick your colour off any of their colour cards. You have great flat surfaces, so if it were me i'd roller the top coat on with small gloss rollers. You may need to do more than two coats but it will give a better finish than using a brush. Don't over load the roller, don't worry too much about the small air bubbles, they flatten out when it dries and kind of gel together. x
...See More
Help!!! More tiling issues!!!!! Kitchen backsplash this time...
Q
Comments (32)
Tiles are one way to introduce some pops of colour in your kitchen. If you are worried about the grout discolouring, use epoxy grout which is more resilient to liquid staining. Also, if you use a coloured grout, discolouration will be less noticeable. If you choose textured tiles with rectilinear edges, grout lines are almost invisible. Using tiles can look more traditional compared to glass or stainless steel. The problem with stainless steel is keeping it looking good. Drip marks and grease are instantly noticeable. Glass is less obvious when splashed. They are both more industrial and modern looking. What about using the same material that makes up your worktop as the splashback? Most manufacturers of manmade worktops also do an 11mm thick splashback and upstand.
...See More
urgent splashback advice needed
Q
Comments (9)
Like the second idea and that’s for the sketches! the mirror we have has a frosted edge around it and unfortunately, is one where the whole unit hangs on the wall (as opposed to ones I’ve had which you fix the back panel on first then slot the mirrored part over it so you can tile up to it. I’m not sure exactly where it’s going to sit on the wall yet as it needs wiring in so the tiles around would have to be done at a later date - awkwardly, ha ha. Shame I didn’t think about that beforehand! Looking at some of the offcuts we have though, we could create smaller tiles and have 3 up and 6 going across. Do you think that would work better than one full and a half tile? The width of the sink shelf only takes one full tiles and 3/4 tile (unfortunately the wood tiles I was buying were discontinued so I’ve got LVT to go across the front and using the wall tiles on the top where the sink instead. Not thought about using the vinyl tiles on the wall though! What an idea!. Not sure I will have enough though as only ordered enough for the WC wall. Thinking cap on ...
...See More

Sponsored

More Discussions

How to decorate window on landing

13

Media wall bottom shelf.. logs? Ornaments?

7

How can I fit an induction hob in place of a range cooker?

5

Inserting a bathroom downstairs and adding a separate toilet

4

Help…dilema I need some ideas

15

United Kingdom

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.