Can you tell me about this wood floor?

dtmarek5

2 years ago

What is the size of the herringbone planks? Is this solid white oak or engineered?

Wood Flooring · More Info

Sort by:Oldest

Comment (1)

PRO
The Prestige Flooring Co.
2 years ago
This is an engineered oak floor that we refurbished for our client. We sanded the floor back, then sealed it with a hard wax oil. Although we didn't lay the floor, I would guess that the herringbone blocks were approx. 400 x 100mm.
0
Related Discussions
Talk to me about hardwood floors
Q
Comments (6)
I have been a wood flooring professional for over 30 years, so my response might be more detailed than you want! I'll break it down into several issues and you can choose which bits might help you the most. Color: If you have children, a medium stain/wood might serve you better because dark floors show dust and dirt. Wear: A wood that has a stain on it that is much diferent from the wood's own natural color, will show scratches more than a wood with no stain. A matte or semi-gloss finish will show fewer scratches and wear. Composition: What is your subfloor and where are you located? Both these factors will help determine the material to use. Solid- This flooring is made from pieces of wood that are one solid piece from top to bottom. So, if you want oak, the wood is all oak. It can come from the mill already stained and finished (prefinished), or it can be finished at the jobsite after being installed and sanded. Engineered- Engineered hardwood flooring is constructed of two components, a ‘core layer’ on the bottom, topped by the ‘face veneer’. The veneer, or wear layer can be of differing thicknesses. The thicker the wear layer, the more times the product can be sanded. The core layer is constructed of multiple layers of wood which can be of the same or of a different species, glued together in a cross-hatch configuration. This cross graining provides greater dimensional stability, minimizing the expansion and contraction that natural wood exhibits when exposed to varying moisture levels and temperatures. It can come from the mill already stained and finished, or it can be finished at the jobsite after being installed and sanded. If you are going to install one area now and another later, you might want to choose an unfinished product that can be sanded and finished at the jobsite. You also want to ensure that you keep a record of the materials used on the first section so that you can match the second section after the color has changed. They will both end up the same (or at least very similar) color after a few years, but they will both change over time. The other way that you can ensure that they match is to purchase enough prefinished (which has the stain and finish applied at the factory/mill) material for both areas at the same time. For the best match, mix the wood from all the boxes for the first floor, then repackage the rest. Store it in a dry place until you are ready to install it in the other area. Purchase products and hire a professional that are members of the National Wood Flooring Association. They set the standards for and provide education for our trade. They offer certifications in installation and in sand and finish which oprovide homeowners further assurance of skill and competence.
...See More
Does anyone know how I can achieve this look with tiles and wood floor
Q
Comments (12)
Tracey, those are encaustics which tend to be 18-20mm in depth, your wood will most likely be engineered ply if you have underfloor heating and depths vary 12mm upward. If one or the other substrate needs to be built up to accommodate the other that is possible. Be aware there will be some movement between the two, more so if you are using long boards, less with parquet, so consider how best to deal with any movement or expansion between the two. There are plenty of products available for this. Make sure your encaustics are sealed correctly. You could also find the cleaning regimen of the two finishes may be very different. Lithoflin for encaustics - and oil/wax for an oiled floor, that's not a great combination, so perhaps an easy maintenance wood might be better in the long run.
...See More
Tell us one thing you love about your home!
Q
Comments (17)
Our house is very cosy. I love coming inside after shutting the hens away at night, locking the doors and feeling warm and cocooned tucked away from the outside world. When I go outside in the evening I often hear owls hooting to each other which is just magical.
...See More
Can anyone tell me where I can get a 1000x900 shower enclosure please
Q
Comments (12)
Hi Sunny, I'm guessing the layout is like this then? Which is why you wanted a 900mm wide shower. I'd actually go with the 900 x 1200 as it's longer and will suit the room better, plus, if the layout is like this, then you have the room for it. Here's a link to all those in that size from Victorian Plumbing, so depends what your style is. Victorian Plumbing. They sell loads, so i'm sure you'll be able to find one that will suit. One thing to watch out for is the size of the basin and toilet. You will be better off with a short projection toilet and don't come out too far with the basin either as the space to exit out of the bath will be lessened. Regards to flooring, tiles etc, that's personal choice. What style do you like, what colours do you like, and most importantly what is your budget for the project?
...See More

Can you tell me about this wood floor?

Comment (1)

The Prestige Flooring Co.

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US