Do I paint doorframes and bannister to match or colour wash?
9 months ago
Featured Answer
Sort by:Oldest
Comments (13)
- 9 months ago
- 9 months ago
Related Discussions
do i paint black beams white?
Comments (2)Hello, Shot-blasting (AKA sandblasting) the beams will bring back the natural warmth of the wood, which matches perfectly with the red brick, the natural tones within the wood once treated post blasting will bring a level of depth to the room, and brighten it up making the space feel larger too. The natural 'sandy' undertones of the wood will blend well with a country theme, and even a more contemporary scheme. Choosing to white wash/ totally repaint to white will certainly allow more light to reflect throughout the space, giving a brighter, airier feel to the room. It really depends on the scheme (look) you would like to go with. A country, classical warm homely feel would be better with the natural wood. A more contemporary or a more chic, luxury scheme may benefit more from the white. Think about what furniture/ accessories you have for the room, and how they will work with either the natural or white. I hope this was helpful. Review Us Follow, Like, Comment INSTAGRAM @michaeljhaladesigns...See MorePAINTING BANNISTER AND NEWELL POST
Comments (28)Looks great :-) really like that wallpaper, as I did the first time you posted it as an option for your bathroom :-) Great little space, re the ceiling, I think it would look great painted the same colours as the walls if you wanted to change it! Looks good as it too :-)...See MorePaving colour for driveway - To match or not to match?
Comments (138)These are my Japanese acers, I selected the shorter varieties since the drive isn't huge. The red one is approximately 10yo, the other two are 6-7 yo. They grow quite slow and stay compact,in my opinion. I tried to take the photos in front of our Cooper so you get the idea of the sizes. They are Garnet (2+ m) Bi Ho (2m) and Winter Flame (1.5m and it grew 50cm during the last three years). Acers can be shaped, I'll be removing some lower branches to add some structure. They are gorgeous in autumn and passers-by often stop to admire....See Morehow to “match” or not match herringbone floor next to a staircase
Comments (7)I completely agree, forget about herringbone on the stairs. Consider: a) Leaving or re carpeting your stairs as they are b) Remove the carpet and paint the treads and risers with a durable floor paint. Dulux does one. or my favoured option c) remove the current carpet and replacing it with a runner (carpet that does not go to the edge). Think about a flat weave or a sisal look covering. Try not to go for actual sisal as this is slippery and can be problematic. You will have to consider if you want the edges turned or turned and bound. Before fitting the carpet you will have painted the exposed edges, if needed to match banisters etc. When it comes to the landings, the most expensive and nicest option is to have the runner made to fit but this is more binding or other finishing. By the way I would not particularly recommend a highly contrasted binding, nor would I suggest a particularly wide one as I think it now looks both look a little dated. See attached lots of options that may get you thinking. and more expense. The most cost effective option is to leave landings bare and either fully paint or sand and stain depending on adjacent floors....See More- 9 months ago
- 9 months ago
- 9 months ago
- 9 months ago
- 9 months ago
- 9 months ago
- 9 months ago
- 9 months ago
- 9 months ago
siobhanmcgee90