Love the floor!!

leonieshaw

9 years ago

Where is it from/what type of tile is it? I am looking for something like this for our kitchen at the moment!! :)

Melissa & Sole Kitchen · More Info

Comment

Related Discussions
Pretty cottage with sagging floors
Q
Comments (4)
Hiya, My cottage is about the same age and I know exactly what you mean. First, I would check and see if it is structural. There is no point in doing all the work, then finding out that you are going to have to replace it in 5/10 years when it folds in on itself. I stripped the floors in one room and it was a massive job. Old floorboards have big gaps and mine had lots of old nails and other bits that I had to remove by hand one by one. Eventually I dark stained them and bought a carpet that leaves a 1m gap around the edges of the room, to give it the period feel, but cover up the not so good boards in the middle. After doing one bedroom, I have screwed Flooring boards (thick special chipboard) to the others. Made it level and reinforced, then bought a good underlay and carpet. To be honest, it looks and feels so much better, I wish I hadn`t bothered with trying to strip the floors in the other room. Please show us pics when it is finished :)
...See More
Which wall tiles to go with these floor tiles for en-suite shower room
Q
Comments (10)
Hi Vicki, I would go for bigger tiles, ones that are 60 cm x 30 cm. If you use smaller tiles the outcome may look too busy with your chosen floor tiles. I also suggest choosing very light grey wall tiles, the colour of which matches to the grey background colour of the floor tiles. That would give you the industrial sort of vibe you are aiming to achive. Order different samples and see how the combinations look in your bathroom. The colours can change dramatically depending on the lighting. Kati
...See More
Original wooden floor in the bathroom, is it possible?!
Q
Comments (9)
If you have large gaps between the boards then we did find this product in the UK (can’t remember the name though sorry!) that was a tape in a V shape you squeezed together into the gap then it expanded out to hold in place. It’s designed to stop drafts but could work at stopping water from escaping as well. Otherwise there’s the original trick of mixing sawdust from your boards with pva and pushing this between the boards. Few coats of the boat varnish as mentioned might just fill in any small gaps though so it’s only an issue for deep ones.
...See More
Wood flooring or LVT throughout? Including kitchen? Pls, your advice!
Q
Comments (7)
I have solid wood flooring in most of my house, tiling in the kitchen and hall. We bought the wood unfinished and did all of the finishing ourselves (it was already sanded). Cost wise it worked out around £30 per square metre which is really good. Most of the wood I finished in Osmo Oil either Raw first and then clear or white first and then clear. It does darken and warm with age so this needs to be factored in when designing colour palettes. If you like fairly neutral palettes this can work well, if you prefer lots of colour then a more consistent Amtico product or factory finished wood may be preferable. I wanted to be able to re-finish and re-oil my floors if necessary. I have LVT in my studio which is really practical and looks good, however it doesn't feel like wood.
...See More

Love the floor!!

Comment

Related Discussions

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US